Electronics Forum | Sun Aug 29 18:08:29 EDT 1999 | M Cox
| | | fuji gp, cp642e, ip3 and other | | | | Dear Sir, please explain what you mean by GP, are you referring to Fujiu GSP printers? if so, what models are you looking for. We have GSP3-5000 and GSP3-4000 avaiable for immedate sale at $25,000 each. F
Electronics Forum | Fri Jul 19 11:02:15 EDT 2019 | dman97
You never answered my question on the proper data. Do you have a hard copy of the proper data? Is the diskette (if you have it) in Fuji Flexa format? In order for flexa to communicate with the CP6, you must have the correct proper data.
Electronics Forum | Tue Jul 02 10:37:36 EDT 2019 | dman97
I also forgot to add that if the proper data was not generated by flexa for the CP6, then flexa will not communicate with the machine. You need to flush the proper and resend using flexa for the communications to work correcty. Good luck!
Electronics Forum | Fri Jul 19 11:16:21 EDT 2019 | dman97
And yes if the proper data is not correct it will give you a error message because Flexa cannot communicate with the CP6.
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
Electronics Forum | Tue Jul 02 11:04:20 EDT 2019 | dman97
The pin outs are not mirrored. The proper data files usually come on a disk and are usually inside one of the cabinets on the machine. Chances are that the proper data disk is MCS formatted. In order to extract the proper data from the disk you woul
Electronics Forum | Tue Jul 02 10:27:31 EDT 2019 | BigFuji642
I tried using the cable on page 4. The DB9 to DB25. Is that the correct one to use with a USB to DB9 adapter? What is the difference between using MCS and C/C for communication? Which one should I be using and how do I see which one is being us
Electronics Forum | Tue Jul 02 10:57:29 EDT 2019 | BigFuji642
Are the pinouts for the cable mirrored (like normal Male to Female DB pinouts)? Like the Male pins when looking straight at them are 1 2 3 4 5 and the female when looking straight at it is 5 4 3 2 1 Or is it that they are not mirrored and both ar
Electronics Forum | Fri Jul 19 11:09:29 EDT 2019 | BigFuji642
Yes we have the hard copy of the proper data on a floppy disc. If we do not have the correct Proper Data, could it give me the error below? I was thinking it would make it past the log onto machine comm server stage, and then have a different err
Electronics Forum | Fri Jul 19 13:19:25 EDT 2019 | BigFuji642
I have not imported the data to Flexa yet. I will have to find a floppy drive. You mentioned below converting the proper data using a MCS. I thought MCS stood for Machine Communication Server. Does it mean something else? How do we convert it us