Electronics Forum | Sat Jul 17 15:22:17 EDT 2004 | rohman23
Thanks for all the responses. I do agree with what was said, and can certainly see reasons not to try. I'll write a little more about what we do. We are a defense contractor, and as I mentioned very high mix, low volume. We only have 1 SMT line.
Electronics Forum | Wed Nov 03 09:18:27 EST 2004 | Simon UK
Hi Dennis, It is all dependant on what you state for the class of product i.e. Class 3 is the top end acceptance criteria used mainly in Aerospace and Military. You have 2 terms you need to grasp to avoid confusion. 1. Acceptance Criteria 2. Target
Electronics Forum | Mon Feb 23 13:25:21 EST 1998 | Steve Gregory
Steve - you must not work to IPC class 2 or 3 requirements. If the solder is "pillowed" around the lead, I would strongly suspect a wetting problem. Most of the Paladium leads I see soldered have a strong line of demarcation but no pillowing. Hav
Electronics Forum | Wed Nov 03 09:42:31 EST 2004 | dramos1
Hi Simon, Thanks for the immediate reply. We really appreciate it very much. Currently, we are using Class 2 for the visual inspection criteria of our telecom boards. In IPC-A-610 Rev. C criteria, there are TARGET, ACCEPTABLE and REJECT criterias.
Electronics Forum | Wed Nov 03 14:46:29 EST 2004 | dramos1
Hi Russ, Thanks for the reply. In IPC-A-610 Rev. C on section 5.2.9 {Mounting - Connectors] page 5-21 on the manual [January 2000], the acceptable class [1,2,3]listed 3 items. In order for the connector to be accepted, are all 3 items must be met? I
Electronics Forum | Tue May 26 10:52:02 EDT 2020 | spoiltforchoice
No idea, could be a weird translation error, but its certainly something I have seen . For an FLX they just ask for this "5-6 bar, clean, dry, oil free, filtered 2 µm, connection diameter 8 mm", 40litre/min Personally I would go with a mo
Electronics Forum | Mon Apr 17 19:42:34 EDT 2000 | Russ Cutler
We just bought a new Heller 1800 EXL reflow oven for reflowing SMT boards. We us a low temp RMA solder paste with 2% silver. Everything we build is to IPC Class 3 specifications. We have approximately 600 different types of circuit boards we build
Electronics Forum | Fri Jun 02 14:42:06 EDT 2023 | tommy_magyar
"If for example a customer requested assemblies but never specified their requirements, would MFGs be expected/required to follow parameters from a specific class related to the end use of said product?" Answer: The customer placed an order with you