Electronics Forum | Fri Apr 26 08:04:59 EDT 2019 | griinder
We solved the issue. A stencil must be clamped in the machine to allow the command. The stencil serves to hold the board level, while the pins are set. The machine is smarter than us.... :/
Electronics Forum | Wed Oct 07 16:00:01 EDT 2020 | lpbro
Using MPM Momentums, I like choosing blades that allow about an inch of overhang on each side of the board. I feel it allows me to dial the squeegee pressure a bit better.
Electronics Forum | Thu Oct 13 06:35:42 EDT 2022 | sophyluo1985
You can ask about our GOLDLAND. If you want to know more, please contact our engineer Quinn Luo, sales07@goldlandsmt.com
Electronics Forum | Thu Oct 13 15:39:52 EDT 2022 | proceng1
On one of our MPMs, the password that came with it was 'printer'. I don't know if that was default, or what the PO set it as.
Electronics Forum | Tue Jul 18 11:55:55 EDT 2023 | cyber_wolf
As I said, the intent of the "stepped" feature is to aid in paste release. Continuous is normal mode. I believe the manual explains these features in depth.
Electronics Forum | Fri Jul 21 08:37:03 EDT 2023 | dimamalin
Tanks everyone ,I will take yours advices into account. If there are working profiles for part 0201 & 01005, I will bi glad to get look at them. my e-mail: dima_ma@usr.co.il
Electronics Forum | Mon Aug 04 12:34:06 EDT 2014 | cyber_wolf
Those of you that have Momentums may want to have a look at the metal cover that covers the X-camera ball screw. I would be very interested to know if the top of your camera bracket is rubbing on the bottom of the X-vision ball screw cover. Please
Electronics Forum | Wed May 13 15:26:45 EDT 2015 | cyber_wolf
We are high mix - high changeover aerospace manufacturer. We have 3 1809 MK3 air ovens. There has been absolutely no issues with them. We have 4 MPM Momentums. I looked at DEK but felt the MPM's were put together better. They are very easy to use
Electronics Forum | Mon May 13 13:45:33 EDT 2019 | whitelancer64
I am having the same problem with the MPM Accela solder paste printer machine. If the fiducials are adjusted for PCB alignment, the location of the paste is then wrong, and vision inspection fails. This is a problem for both pad preview inspection
Electronics Forum | Wed Apr 24 13:49:19 EDT 2019 | griinder
I have a support question concerning setting the gridlock tooling in manual mode on a MPM Momentum Elite. I am printing the top side (bottom is populated with parts) of a thin, flimsy PCB. The Grid lock tooling bows the PCB upwards in Auto mode, beca
.gif)
