Electronics Forum | Fri Oct 01 21:21:05 EDT 2004 | Darren
Dave Try fuji's web site they have the ops and maintenance manuals in the support area. While you are there they have a bunch of useful stuff for software and machine manuals
Electronics Forum | Wed Oct 13 16:31:25 EDT 2004 | Frank
Strange, the OP said they don't want to use PDF because all the manual work to get the data out of PDF and into what ever system they are using... The data books from Practical are in PDF, so no help there. Unfortunately, I am not aware of any other
Electronics Forum | Fri Aug 19 04:09:49 EDT 2005 | md
some water managed to leak onto a couple of backplanes boards. The OP. has blown any water off the boards, would these need to be baked ?
Electronics Forum | Fri Aug 19 05:58:01 EDT 2005 | death and life
fire the OP and do that on your own! 1,do not use your mouth water! 2,it is your fault whom make water blow on the boards 3,you need logical thoughts 4,go to god and pldege for help and ideas~
Electronics Forum | Tue Jan 31 13:41:12 EST 2006 | outgasser
We are currently experiencing problems with delamination during rework/2nd op activity on lead free. I am suspecting this is a result of the use of a heat gun to rework components. My assumption is that the high heat and time in area greatly increa
Electronics Forum | Tue Sep 11 03:48:45 EDT 2007 | kevinjm
Shenzen Comofaje sell out of China, delivery to Ireland takes about a week, but prices are much lower, $15-40 for 250/500 strips. Our ops are happy enough with them http://comofaje.en.alibaba.com/
Electronics Forum | Tue May 22 11:58:48 EDT 2012 | rway
Chris, > > If the short in the picture is parallel > to the wave turning the board 90Deg will solve > the issue. Because then the lagest spacing will > face the wave parallel and the smallest space > perpendicular. Yes, good point Patrick. H
Electronics Forum | Mon Aug 26 03:47:08 EDT 2013 | pradeep_selec
For Machine's we can go with the Machine spec, but what about the SMT assembly process. There would be a defined / suggested Temp & Humidity range to get best O/P.
Electronics Forum | Mon Oct 27 16:28:18 EDT 2014 | hegemon
Thanks to the OP for the last post, closing the issue. So many times these threads can kind of tire out, and no one ever knows what the solution to the original problem was. Of course, that's the point of these forums. 'hege
Electronics Forum | Fri Jul 24 16:37:47 EDT 2015 | cnotebaert
to my knowledge it will always be manual insertion,, if you mean reflow, not insertion, I always apply solder to one side, reflow, then apply tacky flux pre print to the already soldered pins, print op side, assemble part then send through placement