Electronics Forum | Wed Jun 26 13:56:01 EDT 2019 | SMTA-John
We are considering storing OSP coated PCBs in nitrogen. Will this extend OSP life ? Is the eventual failure of OSP due to oxygen eventually reaching the copper over time ?
Electronics Forum | Tue Dec 12 19:57:56 EST 2017 | myke03o
Hi Experts. We have an expired OSP pcb and we wanted to extend the shelp life. Is it possible to rework the PCB by removing the OSP coating, micro etching and re-applying OSP finish. Any advice if this can be done? Any solution for this OSP pcb e
Electronics Forum | Tue Sep 11 22:52:18 EDT 2007 | davef
Here are some options for removing OSP coatings from pads of the BGA substrates. * Leave the substrates in storage for 13-14 months. Shelf life of OSP coating is ~12 months, depending on the product. * Wash the substrates in your aqueous washer. Ea
Electronics Forum | Tue Aug 31 10:21:46 EDT 2010 | ranco13
Hello all, Can anyone know what influence has on RF/HF components when using PCB with OSP coating? We are now manufacturing our RF components on PCB with ENIG coating ,and want to use OSP instead. By the way:If anyone can send me an article on this s
Electronics Forum | Wed Feb 14 15:54:18 EST 2018 | cbart
do you see signs of contamination or oxidation? if not why not just send them to the board house and have another OSP coating layer applied?
Electronics Forum | Wed Aug 21 10:26:08 EDT 2002 | stownsend
We are using OSP coated boards and no-clean solder paste. In a few instances, we are seeing increased distortion in an audio circuit. Has anybody seen or heard of surface insulation resistance (SIR) decreasing after reflow on OSP boards? Is it possib
Electronics Forum | Thu Oct 26 10:32:14 EDT 2000 | CAL
We currently use a tool that we have developed and sell that can provide real time feed back on OSP coatings. With OSP it is a case by case basis on how many times you can reflow or apply heat before it becomes detrimental. Also, Depending on your pr
Electronics Forum | Fri Sep 07 09:55:19 EDT 2007 | russ
what type of solder paste are you using? Why the concern over wetting spread to the edge of pads? Are the solderjoints formed correctly at the component? Russ
Electronics Forum | Tue Aug 20 21:46:09 EDT 2002 | davef
Rinse => OSP Coat => Rinse => Dry Hot Air Solder Level: Preclean => Rinse => Flux Coat => Solder Coat => Hot Air Level => Cool => Soft Brush => Post Clean Rinse => Dry Look here http://www.epa.gov/opptintr/dfe/pubs/pwb/ctsasurf/download/pdf/ch2.pdf
Electronics Forum | Fri Aug 15 01:31:17 EDT 2003 | Jay
Hi All, I work for a contract manufacturing and we are having a new PCB to build. The PCB has OSP coating on it and it has been sitting open in the production floor for about 15 days. I am not sure weather it will affect the soldering process or not