Electronics Forum | Mon Mar 11 04:25:49 EST 2002 | wbu
Don�t your recent findings on soldering defects point towards less need for AOI? Besides that, I imagine that with 100% control and having only good prints being processed while the bad ones getting washed and reprint you will see this magical 0%. Sh
Electronics Forum | Fri Jul 09 18:27:43 EDT 1999 | Scott Cook
Jim, GREAT to see you post and contribute. Nice to see the forum attracts experts in their field. 'Twas good seeing you at West again, bud. Scott Cook
Electronics Forum | Tue Sep 26 07:44:14 EDT 2006 | davef
) [See we just edited the post to add 'Ken: '] [See we just edited the post again to add 'B>'] [See we just edited the post again to change 'B>' to 'B>)']
Electronics Forum | Fri Aug 08 10:01:26 EDT 2008 | ethancw1sel
Hey, I've been working with various Universal Gold Feeders sizes, and I've seeing that the sensors are fairly fragile. Any other users of these feeders seeing this? Of course the manufacturer says we are the only ones seeing these issues.
Electronics Forum | Sat Dec 19 04:46:24 EST 2015 | padawanlinuxero
Hello I am curious about an anomaly we are seeing in the new profile for one of our products, we run it in a wave solder and after it gets solder we see that the fillets are not even, we have took x-rays of the terminal but we see 100% barrel fill,
Electronics Forum | Thu Feb 03 20:24:02 EST 2022 | dwl
Do you see foot indentations in the paste? If the part is being blown after placement, you'll see the indentations in the paste. Another random thought; We had worn nozzles and the camera would sometimes see a spot where the paint wore off and read
Electronics Forum | Wed Oct 26 16:22:38 EDT 2022 | singert1980
Problem solved...Sensor would see the board at the stop, but when it clamped in the BUT, the sensor didn't see it anymore. Board is a matte finish so we're putting a sticker on the bottom so it sees it better.
Electronics Forum | Mon Sep 28 06:03:28 EDT 2009 | bobpan
You are probably scanning below the part. Adjust the scan height closer to 0 ex..(.005) and see if that works. If not....its probably the z-rod and the nozzle not seating on it correctly. Good luck
Electronics Forum | Tue Feb 12 12:14:57 EST 2019 | slthomas
I haven't worked on a Topaz of any sort in over 10 years but I'm going to guess that even if you accessed that table, you would see a 0 someplace that you should be seeing a 1. It sounds like *maybe* an input signal from that sensor is not reaching
Electronics Forum | Mon Feb 29 23:41:09 EST 2016 | padawanlinuxero
Is more a guess but, your drawing is missing things, more precise the legends on the edge of the drawing, but for what I can see the diameter of the ball is 0.30 +- 0.05 hope it helps!
