Electronics Forum | Fri Jan 15 07:23:14 EST 2021 | denism
Also, solder splashes can be due to contamination, for example, on the terminals of components. In the past, had a problem with solder splashes on a seemingly standard SMD component. The reason was the incorrect nickel plating process of the componen
Electronics Forum | Mon Jul 11 12:42:46 EDT 2005 | machine designer
I need a good digital photo or two of the turret of a Siplace (or equiv) style SMD pick and place head preferably laden with die or SMD parts to explain a bulk handling concept to some machine neophytes here. I could alternatively use an image of any
Electronics Forum | Fri Feb 04 09:23:21 EST 2000 | Casimir Budzinski
If No-Clean flux does not need to be cleaned, then why do I get readings of up to 27(ug NaCl/sq in) on boards that are not washed, up to 23.4(ug NaCl/sq in) on boards washed with DI water only and from 1.2 to 10.1(ug NaCl/sq in) on boards washed with
Electronics Forum | Wed Aug 19 05:00:56 EDT 1998 | Tom Blum
Hi there, I'm actually facing a lot of trouble with PCB's presenting up to 3mm of bow /twist at reception i.e. before assembly. The PCB size is 220 by 230mm. The boards are to be assembeled SMD double sides with 05.mm pitch on both sides. In order to
Electronics Forum | Wed May 19 09:44:24 EDT 2004 | rlackey
Hello again Grant, In addition to our Fuji CPs we run Universal machines, and although they are pretty reliable, they are not in the same league. Regarding Fuji Placement speed we hit 30K plus on a couple of boards with no issues, but you do have t
Electronics Forum | Fri Dec 13 15:40:53 EST 2002 | pjc
Too many British. Maybe some below can refer you to Dutch or Belgian companies. SMD-Taping Service Bartholomaeusweg 8 D-91522 Ansbach Germany Tel. / Fax: +49 981 17356 Tel.: +49 981 9724363 Fax: +49 981 9724364 www.smd-taping-service.com Reel Servi
Electronics Forum | Thu Sep 22 10:48:08 EDT 2005 | Rob
Cheers Greg, It's unusual to have such direct access to manufacturers & their opinions. I'll tell you what really does get us, and splicing doesn't work well on these occaisions - big SMD connectors, requiring deep pocket feeders. You only get m
Electronics Forum | Tue Feb 15 00:27:39 EST 2011 | jeffr
First clean and de-bur the hole in the nozzle, then try it again. If the Head does not pick up at the feeder, then moves to the dump position...it means that the Vacuum Sensor Board has detected that the nozzle vacuum is above the LOW threshold setti
Electronics Forum | Fri Jul 23 12:38:33 EDT 1999 | Earl Moon
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
Electronics Forum | Fri Jul 23 12:49:47 EDT 1999 | Tony
| There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performing
.png)
