Electronics Forum | Fri Mar 22 17:14:15 EST 2002 | jseagle
What is the height, width, and length of the connector, packaging? We currently place a 2x20 2mm gull wing SMT connector measuring 8mm H x 38mm L x 6.1mm W, packaged on tape and reel with a plastic pickup in the center. We do this on an Assembleon
Electronics Forum | Fri Mar 22 11:00:44 EST 2002 | davef
Like this, eh? http://www.samtec.com/suddenspecs/techspec.asp?series=tsm
Electronics Forum | Fri Mar 22 10:56:41 EST 2002 | jax
Why are you unable to place this part with your Machine. Part to big? No pick up point( nozzle landing area )? No Feeder? Vision recognition? If we know why you can't place it, we might have a fix.
Electronics Forum | Fri Mar 22 13:16:04 EST 2002 | dougt
We place parts like this with a contact systems machine (3Z). The part comes on a reel and has a flat top on it (as mentioned above) that can be removed as soom as it comes out of the oven.
Electronics Forum | Mon Mar 25 07:40:42 EST 2002 | Yannick
We are unable to pick it up because we don't have any landing area, but some guys said that we can add a plastic cap on it so it may help...I will check up..unless you can suggest me other thing Thank you
Electronics Forum | Wed Aug 18 06:34:57 EDT 2004 | Bernard Mulcahy
Hi , Our hardware designer wants to introduce a board with a straddle - mounted SMT connector, AMP part number 84487-1 and FCI 71292-001. This is an 80 pin connector that slips over the edge of the PCB and has 40 SMT pads on either side (at least thi
Electronics Forum | Thu Aug 19 09:38:24 EDT 2004 | russ
We use a locally made fixture that uses tooling pins and a mating block to place the connector onto/into. We then use a toggle clamp to push the connector onto the board. We had to make no adjustments to stencil for our application. Russ
Electronics Forum | Wed Aug 18 10:34:35 EDT 2004 | russ
We do this every day, We print the bottom side, then the top, and have a tool that presses the connector on. We then process the board down the line. The only tricky thing is keeping fingers out of paste. Fortunately this is a single sided board.
Electronics Forum | Thu Aug 19 05:12:41 EDT 2004 | bernardmulcahy
Hi Russ, Thanks for the reply -- It is not a double sided board so I guess I will be doing pretty much the same process as you described. I was wondering about was the tool you mentioned -- Is this just a fixture you got made locally or some specific
Electronics Forum | Tue Feb 26 14:39:19 EST 2013 | eniac
Hi, guys. Does anyone use a EBSO selective soldering machines? Can you write your parameters for two rows connector? Thx!
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694