Electronics Forum | Tue Apr 20 10:43:05 EDT 2010 | userrich
TO PURCHASE BIRAL Lubricants in the USA or Canada from the only factory direct and authorized distributor; CONTACT: RICH FITZGERALD pres. Advantage Dist., & Lubricants, LLC 3434 Marion Road SE Rochester, MN 55904 telephone 1-507-289-5555 1-800-42
Electronics Forum | Thu Mar 18 18:52:29 EDT 2010 | edwaterfall01
There is a retrofit kit to take care of the head cable problem that you mention. The s/n with 7P in it represents what is called the 7 Plus level of the head. There was one more level after that (09) for the GSM. The better heads mentioned in the
Electronics Forum | Wed Jan 20 08:49:46 EST 2010 | edmaya33
I heard some of the manpower of KY transfer to VI technologies to introduce a new technology, same manner as of KY had. This french owned company post an impressive Inspection machine ( Both AOI and SPI ). Going back to ORBOTECH P36+, is there any
Electronics Forum | Mon Jan 04 21:10:39 EST 2010 | cbart
Having them made by a local supplier is the fastes cheapest and most accurate way to get replacements when the manufacture no longer supports. If its broken and you need it ASAP I have used spider wire (fishing line) to mesh back together. laugh all
Electronics Forum | Wed Jan 20 04:21:11 EST 2010 | josh_brubaker
If it's just a break, you can easily glue it with a 2-part glue from Coolchem.com Look for the Integrator 75 and Activator 310. I was surprised at how well the glue holds up. This is one of those mystery products where the repair becomes stronger th
Electronics Forum | Mon Jan 04 16:55:47 EST 2010 | dyoungquist
We use a HEPCO model 3000-2 (hepcoblue.com) to shorten leads on various through hole components before we solder them on a pcb. You will have to verify they have a die that works with your particular LED module. If they do, this is what I would rec
Electronics Forum | Tue Jan 05 17:31:12 EST 2010 | mlerley
Howdy folks! Your friendly neighborhood SMTnet.com programmer here. I've spent the last couple of years adding features and fixing bugs for y'all, and now I need some help. The board attached to this post is an inverter for an LCD display fluoresc
Electronics Forum | Wed Jan 06 09:38:59 EST 2010 | lynn_norman
Via failure could be caused by cracks in the barrel, or thin plating, or fractures in the traces leading to the vias, . X-ray analysis could pick up a fractured trace and cross-sectioning of the vias could pick up the cracks and thin plating. Secon
Electronics Forum | Thu Jan 07 15:28:52 EST 2010 | cbart
did the boards get built by hand or via smt process (through reflow oven)? Someone asked earlier if some one touched up the adjacent joint. The answer to that question is yes. Look at how the solder tails off the smt pad away from that joint! I suspe
Electronics Forum | Fri Feb 26 16:54:45 EST 2010 | davemacnemo
I also am having difficulty generating appropriate text input for our recently acquired Topaz. Previous owner used a big (expensive) piece of Enterprise s/w to get the job done. Where can I get CAD2CAD. Looking on the web yields a lot of viewers and
