Electronics Forum | Thu Aug 26 21:54:57 EDT 2004 | KEN
I ran into this about 2 years ago. The Rework Operators (all 3 shifts) would rework a device, rince the board with tap water (yep, 50k / Cm^3) from a nearby sink, then send the PCB to test (which is really ironic as they had to walk past the DI wash
Electronics Forum | Tue Sep 21 11:01:59 EDT 2004 | pabloquintana
Cleaning method will depend on the type of flux > that you use in your soldering process. Yes it is isopropyl alcohol. We use "no-clean" halide free flux (Multicore X33-06i). We still cleaning and I beleive it is because we roto trim the leads aft
Electronics Forum | Tue Sep 28 19:54:22 EDT 2004 | KEN
If we are talking about Indium...then you will eventually be paying what everyone else is. The resource is diminishing especially with the application into the display markets. Same with silver. We are comming out of an all time low for silver....
Electronics Forum | Thu Nov 11 11:22:29 EST 2004 | clampron
We are using the Red-E Sets on our DEK Infinities and they are working fairly well. There are some issues but the setup time beat the Form Flex and was more reliable than the Autoflex in our machines. We looked at Grid Lock. This seemed to solve all
Electronics Forum | Sat Dec 18 00:00:26 EST 2004 | vinitverma
Hi Rob, I did'nt want to reply, but Base did, and rightly so about the dates. But that's not we're discussing at this moment. We started discussing about what's best for Serge. Now that he has decided for the NXT, good luck to him! But serge, in ca
Electronics Forum | Tue Jan 11 11:08:03 EST 2005 | clarkk
Hello, We are assembling a large pcb with 256 Lumex #SSL-LXA228SRC-TR31 SMT LED's on an HSP 4791. The part I'm using for the library is a modification of an existing SMT LED from the standard library. The problem is that the HSP rejects about 30% of
Electronics Forum | Mon Jan 24 13:14:17 EST 2005 | cyber_wolf
Greg, One thing about this site is the fact that it is an open forum. This means that anyone can pretty much say anything. Keep that in mind if you are representing a company that produces equipment that does not work as advertised, you may get �un-
Electronics Forum | Thu Jan 27 11:33:59 EST 2005 | russ
For what you have right now I would recommend that you use soldering iron tips that are made for component removal. until you get BGAs I wouldn't worry a whole lot about the expensive rework equipment. I would use specialty tips and a heat gun wit
Electronics Forum | Thu Feb 10 09:25:44 EST 2005 | lyrtech
Hi, Actually we're looking for a new reflow oven regarding lead-free process and higher capacity production. We have an opportunity for a second hand Electrovert Omniflo-7 (nitrous ready) that respect our budget. My questions are: Does anyone ha
Electronics Forum | Thu Mar 10 17:44:23 EST 2005 | smtequip
Russ - Sounds alot like Mydata to me....Some of these guys are notoriously bad when it comes to this either because they are unknowledgeable, or desparate for business. On the other side of the coin, some buyers also tend to believe what they want t