Electronics Forum | Thu Feb 22 19:37:48 EST 2007 | vshan
Hi All im facing an issue with my DEK. Once the middle sensor detects the board, the stopper does not able to stop the board on time. i have checked all the basic parameters. Can anyone help me rgd vshan
Electronics Forum | Fri Feb 23 03:13:21 EST 2007 | vshan
if No FMI is that every cycle we have to press confirm, if yes it will effect during production mode rgd vshan
Electronics Forum | Fri Feb 23 07:58:27 EST 2007 | realchunks
Does your camera / stopper move to a spot where it can catch the boad when the middle sensor is triggered? It sounds like you may have your board stop coordinates wrong. Check your X measurement to be sure.
Electronics Forum | Fri Feb 23 08:56:21 EST 2007 | russ
I persoanlly have noticed issue with either method, only time I run into issues with trays is when they get baked at too high of temp and warp. Russ
Electronics Forum | Tue Feb 27 00:40:35 EST 2007 | ivap
We are into PCB testing and one of our customers has expensive foreign equipments whose warranty period has expired. He is looking to have them repaired locally. We found most of the problems are with the PCBs.
Electronics Forum | Tue Feb 27 10:09:57 EST 2007 | slthomas
I came across a place in Israel that guaranteed their work (we didn't have schematics either), but they were a little pricey for us. Let me know if you're interested. I think they started at about $2500.
Electronics Forum | Mon Feb 26 20:33:59 EST 2007 | davef
look here: http://www.circuitmedic.com/guides/2-2-2.shtml We have no relationship, nor receive benefit from the company referenced above.
Electronics Forum | Tue Feb 27 08:36:03 EST 2007 | CAN
I have always locked the setpoint at 130-135F 135 being hte max temp most media beds can handle. If you breach/exceed 140 the media will break down or gum up which will cause many probelms for you.
Electronics Forum | Thu Mar 08 07:52:35 EST 2007 | mhenry6575
I have 3 CSM 84's with mutiple feeders that I would like to sell if anyone is looking? Please email me (Mike) at mike.henry@pulse.com.
Electronics Forum | Tue Feb 27 14:30:07 EST 2007 | jgill
I have a small board with two through hole and two SMTs. Is it easier to manufacture with the SMTs on the top or bottom? Thanks, John
