Electronics Forum | Tue Sep 10 14:27:12 EDT 2013 | ericrr
There is 8 nipples on the X-Y frame that is used to grease the frame, I was told these need to be greased often, as if the bearings go dry and break down it would cost big money to replace the bearing. (not sure how this price compares to other machi
Electronics Forum | Tue Sep 03 05:39:44 EDT 2013 | bobpan
Yes you can upload modcodes from assembler. This works for all quad c-series machines along with some others. I would NOT overwrite anything. I would save them to a new file so you have the originals. Your original modcodes are good.....your machine
Electronics Forum | Fri Sep 06 12:34:00 EDT 2013 | bobpan
Your firmware is so old that the problem is not in the mod codes anyways. You have a problem with the cyberoptics head. If its not working at all, i would remove the lens assy on the front side where the cable plugs in and blow out the unit. Maybe if
Electronics Forum | Fri Sep 06 03:06:18 EDT 2013 | 5pcb
We are a complex pcb supplier in China. We are good at making prototypes and multilayer (8-20)layers PCB. If you think your boards are difficult enough, you can contact me. Let's talk details. sales2@dmele.com Name:Lily Tel:0086-0755-23006293.
Electronics Forum | Sun Sep 08 18:06:30 EDT 2013 | davef
Protect the board: If solder mask protects the board, the level of protection is limited and inconsistent. If you want protection, you need the be thinking conformal coating. Selective ENIG: I believe the reason solderability protection, except mayb
Electronics Forum | Thu Sep 19 23:46:23 EDT 2013 | action_101
Reliability, number of machines in the field, you can pick up an older UIC GSM and it can easily handlrle 0603's and up. On top of that, any fine pitch or bga's and you'll be fine. Plenty of feedets out there too. Manncorp is as low as u can go. Very
Electronics Forum | Thu Sep 26 18:33:59 EDT 2013 | mballen
Hello Derek, Many new ovens do not have the TC connections for use with trailing wires any longer. As "A Very Frazzled Man" said there are several types of profilers available at varying prices, depending on your requirements. I would be happy to s
Electronics Forum | Wed Oct 02 00:35:33 EDT 2013 | sonavc
thanks I tested the conveyor A or B , when it is on the motor turn and the green LED at the out put card is also light on. But when i turn on the X y table motor , the green LED is on , but the motor is not run. I will try to replace the I/O
Electronics Forum | Mon Oct 28 15:13:44 EDT 2013 | larrygroves
It will require an alignment. The tools are usually included in the toolbox, one L shaped magnetic tool, a small square glass plate and there is a tool in the nozzle changer. You can buy them seperately if you dont have them. There is a bigger qu
Electronics Forum | Fri Nov 01 07:51:58 EDT 2013 | tony_d
Hello 2000Nog, I think you are limiting your options here. We use MIRTEC at my facility. I am familiar with both YESTech and Vitrox (Agilent). IMO MIRTEC continues to lead the pack in technology. Worth a look before you buy. Just my two cents...
