Electronics Forum | Fri Mar 26 08:55:45 EDT 2021 | manaik
Hello, We have purchased used Koh Young AOI, the setup does not let us through when you start MCS on start, it says RJ45 connector is out, which is not. delta tau clipper conntroller. The swithc on INIT must be ON or OFF? Do the lights work even wi
Electronics Forum | Fri Apr 30 12:06:54 EDT 2021 | proceng1
I have a small board in a 5x5 array. Thickness is .014". The fist build, the array was all routed with mouse-bites. Customer doesn't like the edge left by the mouse-bites. Board house says they can't v-score a board that thin. I'm not sure what o
Electronics Forum | Thu Jun 17 18:08:05 EDT 2021 | emeto
Evan, not sure if you solved it already. I wanted to mention any couplings being lose related to the motor and conveyor movement. Some have set screws that get lose with time. Also when you say manually, do you meant with a handle or you mean through
Electronics Forum | Mon Jul 12 20:26:10 EDT 2021 | stephendo
A test that I would like to see is, expose parts for 24 hours 40%-60% RH, 25C for 24 hours. Then seal with a HIC and minimum desiccant that Jstd 33 requires. Five to seven days later open and see if HIC says good but parts have excess moisture. I t
Electronics Forum | Wed Aug 04 18:12:27 EDT 2021 | tomdegas
I am trying to install an A12 tool on my MY15 and I get the following error: "F-TLMN-9: Failed preliminary fetch during installation" I looked it up and it says Operator error and that the tool is missing. The tool is in the tray and the MY15 picks
Electronics Forum | Wed Sep 22 03:46:02 EDT 2021 | zxcvb
Hi all, I bought a PT2399 delay after reading a detailed introduction article about this device, here's the link:https://www.apogeeweb.net/circuitry/pt2399-delay-features-datasheet-application-circuit.html It says that BU9253 is the alternative of PT
Electronics Forum | Thu Oct 21 07:24:29 EDT 2021 | korb23
as its a customer product we cant change much of the process. the pins have gaps on them to allow for out gassing. its purely gravity when the solder is liquidous i believe. need a carrier as you say or a type of adhesive to hold them down. do you kn
Electronics Forum | Fri Apr 15 08:42:23 EDT 2022 | sn
Thank you for sharing the helpful information. Let's say the PCB is a double-side assemble process and this PCB has completed the first reflowing SMT assembly process, is there any concern if the board is kept on the production floor with temperatur
Electronics Forum | Fri Aug 26 14:18:43 EDT 2022 | jojoled
I am posting answer for anybody who finds this post : very price wise is HYDRON SE220 from ZESTRON....the most important for me is that in technical sheet there is description "highly suitable for power LEDs, SMD LEDs, and flip chip LEDs) which is in
Electronics Forum | Tue Oct 18 07:02:47 EDT 2022 | poly
The product editor complains if I have a part that overhangs the edge of the board. Any hints on how to fix this? Set the "board" size bigger than the actual board and the use an offset to make it in the right place? Or is there a better way to say t