Electronics Forum | Wed Mar 17 21:42:19 EST 1999 | Chuck Garth
We are presently aluminum wirebonding to gold plated lands. Our board manufacturer has been very inconsistient in the quality. It seems as though theey are over etched by about half the amount they should be. Can anyone give me the spec's that normal
Electronics Forum | Mon Mar 15 15:47:51 EST 1999 | Steve Schrader
| Are stencils universal from one printer to another? We are looking into the possibility of going from Solderprint 1414 manual printer to a more automated printer. We are also considering bringing some boards we currently outsource in house. I w
Electronics Forum | Tue Feb 02 10:56:53 EST 1999 | Justin Medernach
| Would anyone have experience or information on where I could find pad geometry for tantalum capacitors that can be surface or plated thru hole mounted. | Yup, Check out IPC-782. That's got all the info on land geometries that you'd be looking f
Electronics Forum | Thu Jan 14 22:52:28 EST 1999 | Wayne
I am experiencing a problem with a surface mount coax connector that over time pulls loose from the PWB. The connector has 4 small gold plated leads and we are soldering it to a flash gold board. A cable plugs into the connector and puts some const
Electronics Forum | Tue Jan 05 13:53:35 EST 1999 | Chrys
| Hi All, | I work with CNC Routers . | I use full perimeter routing of double sided populated panels, in a high volume/ mix application environment. We chose stand alone routing machines for our facility . | I'm interested in your input for bette
Electronics Forum | Mon Dec 28 12:16:40 EST 1998 | Jon Medernach
Chris, We are involved in several developments using gold stud bump attach. We make a stud bump bonder and have several processes for attach. Solder attach is best done by plating up the substrate, the underfill must be able to provide enough mechan
Electronics Forum | Tue Dec 29 10:24:35 EST 1998 | Earl Moon
| Chris, We are involved in several developments using gold stud bump attach. We make a stud bump bonder and have several processes for attach. Solder attach is best done by plating up the substrate, the underfill must be able to provide enough mech
Electronics Forum | Wed Sep 30 11:57:19 EDT 1998 | Manish Ranjan
Hi Everybody Is anyone aware of the possible causes that may lead to voids in the solder bumps after assembly. We assembled some dice on thin substrates and after assembly, void formation in the solder bumps were observed. We have already trie
Electronics Forum | Wed Sep 30 11:56:46 EDT 1998 | Manish Ranjan
Hi Everybody Is anyone aware of the possible causes that may lead to voids in the solder bumps after assembly. We assembled some dice on thin substrates and after assembly, void formation in the solder bumps were observed. We have already trie
Electronics Forum | Thu Sep 10 16:15:52 EDT 1998 | Larry Johnson
I was wanting to know if double sided reflow can be done with a metal plated BGA on topside. We would be running bottom side first. My boss seems to think the only way it can be done is by placing glue dots on the bottomside compoents because the B
