Electronics Forum | Mon Jul 31 19:52:51 EDT 2006 | darby
TOOLING > OFFSET. The pcb stopper is attached to the camera and a default stop position is calculated from the PCB dimensions. If your stencil image is offset left or right then you can either fiddle the pcb size or input the offset. Offsets front an
Electronics Forum | Mon Aug 14 10:08:00 EDT 2006 | Paul@Boxborough
sant, When I worked in contract manufacturing, I used Air Vac or SRT systems which are rather large units. They are great for larger boards and BGA's. In my OEM life, I prefer smaller desk top units, which are more adapted to small boards with small
Electronics Forum | Mon Aug 21 04:20:49 EDT 2006 | Rob
Hi Mika, I used to work for the largest chip cap manufacturer in the world, and by far the largest problem we would see was cracking due to incorrect z height adjustment on Chipshooters. It can also cause solderballs and bad joints by displacing th
Electronics Forum | Tue Aug 22 17:03:32 EDT 2006 | pms
Steve, Be careful with that TP-9.......... Mydata will support the machine (as long as you pay a registration fee, I believe), but no support for real old software versions. Make SURE it has at least software version 1.6 or above. If not, the magaz
Electronics Forum | Mon Aug 28 10:51:51 EDT 2006 | SWAG
http://www.brigarelectronics.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=BE∏uct_Code=GP-MF552&Category_Code=C Seems to be working well. I didn't remove the housing from the machine = recal. The placements are right on, it's just a bit out of f
Electronics Forum | Thu Aug 24 12:53:56 EDT 2006 | russ
yes, it could have been from all 3 locations. without any detail whatsoever about your process or anythign it is impossible to help!! please check your incoming material prior to processing please check your reflow profile to ensure that max temp
Electronics Forum | Mon Aug 28 13:14:49 EDT 2006 | SWAG
We just bought an Advantis w/flexjet head. Great machine. No problems with anything and Universal support is excellent as always. Prec-Pro dual lane feeders are the way to go. Also, I recommend buying the NPI module. This software allows you to
Electronics Forum | Fri Sep 01 01:18:37 EDT 2006 | cardinal
How many of these printers have sold in the last three years? I have sold over 40 in the last 18 months. You can claim all the numbers you want. If you have the units to sell at $25K; then sell them. If you are selling them at $25K, you are selling
Electronics Forum | Fri Sep 15 15:55:27 EDT 2006 | jdengler
Bert, Hopefully the MCS still has PD's from Fuji or the previous user. The Transverse rate IP set in them should be a good guide for any new PD's you may need to make. This speed is usually set as high as possible and still get accurate placements
Electronics Forum | Fri Sep 15 16:30:13 EDT 2006 | russ
yes there is Caveman, (well maybe depending on your circumstances) you need to purchase a manual printer and print the connector then flip and print the other side. (you need a manual printer so you can print after the parts have nbeen reflowed, we
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477