Electronics Forum | Mon Mar 05 22:31:43 EST 2012 | acsscott
Using the 72A FNC nozzles to place 3216 resistors, and 74F nozzles to place PLCC6 LED's. The LED's ar 5mm x 6.5mm x 2.4mm tall.
Electronics Forum | Mon Feb 27 15:03:42 EST 2012 | leemeyer
I have the drawings that you need but your email keeps blocking me from sending them.
Electronics Forum | Wed Feb 29 15:01:33 EST 2012 | gosswald
I got one from PPM to set my machine up about two months ago. They had it in stock and I think it was $50.00
Electronics Forum | Tue Mar 27 05:01:32 EDT 2012 | pdl
If you have a way of sending a lump of metal by email please let every one no how. thanks Pete
Electronics Forum | Thu Mar 15 21:57:41 EDT 2012 | daniel26
On your mount data it has to go 8,7,6,5,4,3,2,1 once it goes to a higher number then the previous it has place and start over try that out
Electronics Forum | Tue Apr 10 05:49:18 EDT 2012 | torch
these would be the guys to talk to at your end http://www.goppm.com/ depending on your machines you may want to upgrade the software side to enable a more user friendly setup environment
Electronics Forum | Thu Apr 12 15:21:12 EDT 2012 | jdengler
Have you tried to do a reset start? When Fuji's act weird the first place to start is a reset start, then re-load the Proper Status and Program. Jerry
Electronics Forum | Mon Apr 16 10:48:58 EDT 2012 | cyber_wolf
Sounds like a bad or out of adjustment servo amp.....
Electronics Forum | Thu Apr 26 15:58:38 EDT 2012 | jdengler
By default we clean after 10 cycles. Some boards are poorly designed and we end up doing it every 4 cycles
Electronics Forum | Mon May 21 11:14:06 EDT 2012 | joeherz
Polymide is like a sponge and absorbs moisture much faster than rigid substrates. Pre-bake your substrate for 2-4 hours at 125C and perform your soldering within 1 shift thereafter or seal in moisture barrier bags.
