Electronics Forum | Fri Apr 30 03:36:46 EDT 2010 | aungthura
Hi All Pls advise me about vapor soldering machine if any1 have been using. Thanks in advance
Electronics Forum | Tue May 18 09:36:29 EDT 2010 | davef
OK. So, why do you have to heat it to 250*C to get it melt? What is the solderability protection on: * Board * Socket
Electronics Forum | Mon May 03 10:09:40 EDT 2010 | rmalick
get a TX1 error. Part remains in shuttle after getting a feeder mispick. machiune needs to br resert and we have to manually remove part from shuttle any idea how to eliminate this?
Electronics Forum | Wed May 05 14:01:46 EDT 2010 | leemeyer
Has anyone ever run across a specification for the sheer strength of a soldered BGA assembly. We are looking to qualify a process and would like to have a target number to shoot for. Thanks
Electronics Forum | Wed May 05 16:12:30 EDT 2010 | thanh
after calibration, now i'm having an issue that placement between lazer and camera off about .5mm on the Y mount. if parts go to camera, the placement are good. but parts that placing with lazer it off about .5mm at Y for all rotation. anyone seen t
Electronics Forum | Sun May 16 00:07:58 EDT 2010 | tpappano
I have a Philips CSM84VZ. There are offset calibrations that compensate the X and Y distances from the camera to the heads and the beam pointer. Perhaps yours is similar and just needs a small Y adjustment for the beam pointer.
Electronics Forum | Tue May 18 16:17:46 EDT 2010 | smttechnologies
I have a unit in our shop that I don't know if it works or not. You can try it out if you like.
Electronics Forum | Thu May 13 03:20:36 EDT 2010 | aungthura
it is true.My supplier only sell the sodler paste in Jar,1 jar must have 500g( minimum), although we wanted 250g par jar.
Electronics Forum | Tue May 18 15:25:14 EDT 2010 | dwonch
We do a lot of intrusive reflow. It works very well but the others are correct you need to verify that the part can survive the high temps. Most TH components are not rated for reflow, we have to test each one ourselves.
Electronics Forum | Fri May 14 13:16:05 EDT 2010 | cyber_wolf
We used to use spray machines. We now have a PMR ultrasonic cleaner. Ultrasonic is the best in my opinion.
