Electronics Forum | Thu Feb 21 12:02:03 EST 2013 | pbarton
We agree with all of what Patrick has said. Hopefully your equipment is capable of the ideal setup you describe with no back flow until the product hits the wave and then back flow until the product emerges the other side. One other reason to strive
Electronics Forum | Wed Feb 15 19:20:46 EST 2006 | Mr. Samir
Russ, On both instruments, I ran them through the wave 20 times each using identical profiles and wave parameters, and then used statistical formulas to measure the variation and repeatability of each. I had these all in Excel, but that was around 1
Electronics Forum | Fri Feb 22 13:19:54 EST 2013 | caurbach
Our new Soltec Delta 3 has this feature (they call it mainwave pushup) where you can add up to 60 rpm to the pump after the leading edge passes over the wave. Unfortunately, our old Delta Wave doesn't have this feature. Ideally we'd like to set it
Electronics Forum | Wed Oct 07 17:36:48 EDT 1998 | Ted Nicholas
Hello! Does any one know of a disadvantage of using the Phillips recommended wave solder SOIC footprint where the last pad on each side of the SOIC is enlarged, instead of placing an extra pair of pads behind the SOIC. Both footprint patterns seem e
Electronics Forum | Tue Aug 24 15:11:32 EDT 2010 | sjohnson
We are experiencing a high incidence of what we call "black barrel" (to differentiate from black pad) with multiple contract manufacturers and PCB vendors. The PCBs are ENIG and during wave solder (SACX-0307) multiple thru-hole components are seeing
Electronics Forum | Thu Apr 05 12:45:45 EDT 2001 | Claude_Couture
On mixed technology PCBs, we find numerous blow holes on the solder joints of radial parts (electrolytics, LEDs, etc). The solution that works so far is to cut the leads very long in the radial inserter so that the part is kinda loose and the air in
Electronics Forum | Tue May 09 02:18:45 EDT 2006 | Helmi
Hi, My company is using HEPA filter to improve air quality coming out of oven/wave solder. But the cost of such filter is quite high and we need to improve the consumption. Any suggestion from fellow experts out there? a. Anybody did a cost reduc
Electronics Forum | Fri Aug 03 09:19:17 EDT 2012 | john1961
If still interested you may want to review information on our GW-10-HT Solder Fountain System at http://www.ddmnovastar.com/wave-solder/solder-fountains/gw-10-ht-soldering-fountain Good luck with your search.
Electronics Forum | Fri Dec 06 18:13:15 EST 2002 | slthomas
We only have solder balling problems in the interface of the pcb with the selective soldering pallet. All other boards (single, and double sided glue and waved alike) are fine, so I'm not thinking this is going to follow the normal path for resoluti
Electronics Forum | Wed Jan 26 20:52:06 EST 2005 | Chua
Hi, I'm going to evalute new solder paste and flux for wave-solder. Appreciate you could advise what are the things need to look out during the evalution. Any recommend step or proper way of doing solder paste and flux evalution. Appreciate your he
.gif)
