Electronics Forum | Tue Nov 17 07:37:19 EST 2015 | micropak
Hello I got a SiPlace 80-S20 machine which had a damaged hard drive in MC. I changed HDD and re-installed RMOS + MC from floppies. Then I turned on the machine (without any Line Computer). The software on Station computer wouldn't go past the "Soft
Electronics Forum | Thu Dec 31 19:25:11 EST 2015 | ttheis
Resolved. Thanks to some information provided by the fine folks over at Capital Equipment Exchange I was able to update the system to a EXP-VID-B video card, replacing the EXM-13A and EXM-14 combination. This update eliminates the jumper cable betwe
Electronics Forum | Fri Dec 04 05:47:57 EST 2015 | rushpcbuk
In PCB design, a BGA (Ball Grid Array) package typically determines the number of layers that a Printed Circuit Board should have. However, the 4-layer board with a BGA package is commonly used than a 2-layer than an 8-layer PCB. On the other hand, t
Electronics Forum | Wed Dec 09 11:24:45 EST 2015 | ttheis
Thank you, Tushar, for the information and for the phone call; it is very kind of you to share your knowledge. I appreciate the advice to back up our machine configuration, mapping and calibration files. I installed the card in slot 2 per your docu
Electronics Forum | Wed Dec 09 10:45:56 EST 2015 | huske
I've put down a SOT223, close enough to your 3pin transistor, in the same situation you have. The large pin was to be soldered on a large exposed ground plane in the corner of a board, over 2"x2" exposed area. We left the paste file as is, so where
Electronics Forum | Wed Dec 09 05:01:33 EST 2015 | luki
Hello, I am a new user of the machine CSM84VZ III and learn to program. After formatting a disc machine lost all settings(I did not know that the settings are on the disc), most of which I have already set. Now I have a problem such that when I try t
Electronics Forum | Fri Dec 11 16:32:26 EST 2015 | dilogic
I've bought used GSM's and registered them by UIC. As a result, I am able to access their web-based document archive, which is of great help if you need to repair something. From the software side, you're on your own. Try to find an old HD backup sof
Electronics Forum | Sat Dec 12 08:34:59 EST 2015 | jfeustel
Tom, we are in the Chicago area and we deal extensively with used Universal Instruments equipment. I probably have just about anything you might need for an older GSM in stock. I agree with Deni in that I would match a replacement hard drive very cl
Electronics Forum | Tue Dec 15 11:14:40 EST 2015 | ilavu
You can create backup image of your entire hard drive using Acronis TrueImage or ghost. I use acronis and never had any problem. As for the hard drive size, "YOU DON"T HAVE TO BUY OLD USED HARD DRIVE". Size of the new hard drive does not matter if yo
Electronics Forum | Fri Dec 11 16:16:42 EST 2015 | fuji_user_2014
I have an Conceptronics HVA102 that is displaying all "0s" in all zones. I tried a new mobo and power supply and it worked for a short time. However, after restart, the problem came back. I also tried reseating and cleaning all connectors and cards.
.gif)
