Electronics Forum | Fri Nov 06 16:20:59 EST 2009 | 11562knott
I've speced in CircuitCAM at 3 different company's since 1996 and wouldn't use anything else. When we program our Mydata using CAD data within 5 minutes we have a program + a couple more minutes to verify the color visual aids by station. When we rec
Electronics Forum | Mon Sep 28 14:02:15 EDT 2009 | swag
As mentioned previous, check all fuses & breakers. In the AC chassis (should be under black cover beind front, right door), remove cover and check main circuit breaker. Also should be two fuse housings next to breaker - if they are lit up amber, th
Electronics Forum | Thu Nov 19 14:35:02 EST 2009 | rrpowers
We do continuous reel-to-reel flex circuit PCB's with a typical "panel" width being 12". (The PCB pattern repeats every 12".) We have done some product that was 24" by doing one half of the board then the other through the screen printer. We have
Electronics Forum | Thu Oct 01 16:56:40 EDT 2009 | gplume
Does anyone out there have experience soldering with Pb solder (Sn 63 or Sn 62) to SAC 305 coated PCB lands (about 50um) or Sn-Cu plated lands (about 10um). I know soldering Pb free (Sac based soler) to Pb/Sn coated lands is a no-no, but was waonderi
Electronics Forum | Fri Oct 09 02:54:57 EDT 2009 | omid_juve
Dear sir`s i want to place one TBGA144 with DRS24 rework station i use many different profile but with near all of them in the ramp stage and reflow stage the balls of the BGA thrown away from the part and cause many short circuit under it and also m
Electronics Forum | Mon Oct 19 19:40:34 EDT 2009 | swag
Thanks for the input. These are 80 pin fine pitch connectors on arrayed flex circuits. We have found from experimenting there is really no good alternative but to use local fids. I found what I'm doing wrong - I needed to move fid finds and correc
Electronics Forum | Tue Nov 03 01:54:04 EST 2009 | vinitverma
Hi, We already export in plain ASCII format with the PCB dimensions, coordinates of all 4 corners with respect to the origin, circuit repeat offsets, and Centroid data with RefDes, X, Y, R, Part No. and Package information. However many customers ha
Electronics Forum | Fri Nov 06 11:39:17 EST 2009 | 14367
As you know, the H1N1 virus is on the move, and we are trying to take precautions. We wish to use a 60% alcohol based lotion for disinfecting our hands. It has been questioned if the added substances could be detrimental to electronic assembly board
Electronics Forum | Thu Dec 24 09:30:56 EST 2009 | fishingfool
Looking for an answer about file structure on CC. It has been 10 years since I have done anything with CC so bear with me. After you have created a job file that has all the components on it and the polarity parts have a pin 1 indicator, I need to
Electronics Forum | Sat May 29 02:26:14 EDT 2010 | vinitverma
If you want to vary the voltage to control the motor speed, then this is not the correct way. Though you can use LM317 for reducing the votage (using a 5K potentiometer) which will sure reduce the speed but it'll reduce the torque tremendously. For D
Distributor of hot-sales and hard-to-find electronic and electromechanical components and supplies. Online catalogue, data sheets and purchasing. win-source.net
100 N HOWARD ST STE R
SPOKANE, USA
Phone: 086-755-83957766
.gif)
