Electronics Forum | Mon Feb 26 08:58:01 EST 2018 | altus_group
Hi Wnb_Pemgr, I am not sure where your facility is based but I was hoping that we might be able to help with some of your issues? Hopefully we can support you with any ongoing problems you have or escalate any cases you have already made with Koh Yo
Electronics Forum | Tue Mar 13 18:13:41 EDT 2018 | dleeper
Placement force usually refers to the amount of force an SMT nozzle applies to a part when placing it. You want enough force to push the component onto the paste but not so much that you damage the part. Some specialized applications involve placing
Electronics Forum | Thu Mar 15 00:53:06 EDT 2018 | dpalombo
We are looking for a domestic contract assembler that has experience placing Zierick pins onto IMS boards. Specifically we need to place the A1, A2, A3 and A4 pins of any length. Information on the pins can be found here: http://www.zierick.com/pa
Electronics Forum | Mon May 14 09:39:26 EDT 2018 | raylawre
How hard is it to find green plastic spatulas for solder paste application?!? Everything I find online specific to the industry is coming out of the UK or so it seems. Nothing stateside? I hate to hit up our paste vendors for freebee spatulas (althou
Electronics Forum | Tue Aug 14 13:54:57 EDT 2018 | etmpalletguy
Vlad, Reduce your aperture opening in the stencil, this will give the stencil a good seal around the specific area of concern. In a wave solder environment, solder balling top or bottom surfaces in a wave pallet is caused by excessive flux burning o
Electronics Forum | Thu Aug 02 09:33:31 EDT 2018 | spoiltforchoice
Yourself , well you can test whatever attributes the devices should have to see if they align with the specification. You can inspect the packaging and markings to see that they match those of the manufacturer. You can also check if the parts have va
Electronics Forum | Mon Aug 20 09:58:58 EDT 2018 | grimus
This is interesting Alexei. So Flex is able to check my complete project before I decide to start manufacturing process, and advice me what should I change to minimize quality and assembly issues? I'm really interested in finding such service. Do the
Electronics Forum | Fri Jan 11 02:19:54 EST 2019 | jlawson
Jetting paste is no easy , ball mesh size and metal loading, SG and the dynamic rehology of the flux medium need to be matched to the jetting forces from the dispensing system. There are many jetting valve makers Musashi from Japan, Nordson Lyquidyn
Electronics Forum | Thu Sep 13 02:52:44 EDT 2018 | directx995
Machines don't have any kinda of local correction on specific offset on PCB, you can only edit main board and it will reflect on all other offsets in panel. For some high running projects we merged 2 pick and places into one (for example 0 degree rot
Electronics Forum | Mon Dec 03 08:25:29 EST 2018 | proceng1
I have a Heller 1808 Reflow oven with the chain that has the edge hold to keep the boards off of the mesh belt. The feed end was more narrow than the exit end, and some boards would fall off. So we adjusted both ends to be the same. Well now, when
