Electronics Forum | Thu Jan 27 19:01:11 EST 2022 | Claude_Couture
We have to make several different kits containing 5,7 or 17 resistors (axial leads). These resistors are supplied in ammo boxes or reel. We used to cut the tape by hand with scissors, but we need to cut 10000's of these per week. Has anyone ever seen
Electronics Forum | Thu Apr 21 20:45:09 EDT 2022 | SMTA-68235204
Hello: I am wondering what you all do with your flux stone at the end of the day? Do you remove the unit and store it in DI water or your thinner for the flux? Do you leave the stone in and just add your thinner to get to the correct specific gravity
Electronics Forum | Fri May 27 14:22:47 EDT 2022 | proceng1
I am not exactly clear on what you are looking for. From my customers, assembly drawing notes are assembly specific. If there is hardware, they might include the stack-up. If we are conformal coating, they usually indicate keep-out areas. If an LED
Electronics Forum | Thu Jun 09 16:44:20 EDT 2022 | SMTA-68235204
We currently are using the HIPPO system. It is a nice program. It's cloud based so nothing is stored on sight. This was helpful when my computer crashed. You can add an immense amount of information into the system. If you can think it you can enter
Electronics Forum | Tue Feb 28 22:45:09 EST 2023 | kumarb
Thanks guys. Chatted with Ekra (Irv / Rudi) and we have nailed it down to the table LEFT side motor and it is specifically the coupler. As I turn the coupler by hand, there is some internal component under the coiled spring that makes a snapping soun
Electronics Forum | Mon Apr 10 00:25:40 EDT 2023 | shrikant_borkar
Hi, Before the replacement of any lubricant Please check and validate the Specifications of previous lubricants. Please get the written equivalent certificate from your supplier. also let notify your machine manufacturer about this .there shoundnt ve
Electronics Forum | Thu May 04 13:16:07 EDT 2023 | tommy_magyar
If I would need to investigate this claim, I would ask the following questions: - was traceability used when this product was manufactured? - was testing mandatory when this specific product was built? - is the test covering the QFP we are talking ab
Electronics Forum | Fri May 12 07:54:28 EDT 2023 | tommy_magyar
I will always stand with routers. Tried them all in the past in different companies, and the router seemed the least risky. With a proper extraction system and good maintenance schedule you will not have to worry too much about dust. To help even mo
Electronics Forum | Fri Jul 28 11:12:18 EDT 2023 | shrikant_borkar
Hi SimionR, Is Glue Process Dispencing or Glue Printing thru Stencil? if Its Dispencing Glue thru a Nozzle then its a controllable process. I have performed it thru HDP-3 Panasonic. Placement of Glue either one DOT or Process must be aligned with th
Electronics Forum | Mon Jul 31 07:37:57 EDT 2023 | tommy_magyar
Hi Simon, Yes, red glue should help, assuming that it is being dispensed by a glue dispenser. For stencil printing I used yellow glue in the past (can't remember the brand). Your pick and place machine should be able to achieve on it's own 35 um
