Electronics Forum | Thu Aug 11 20:12:12 EDT 2016 | davef
Different points on the board couple have different thermal masses. Look here: http://www.ecd.com/portals/5/products/vmole/V-MOLE-Verify-3-Thermocouple.pdf
Electronics Forum | Thu Aug 11 22:38:22 EDT 2016 | anhsang38
Dear Davef Thanks for your information. I already have measured it at the same position for 2 kind of component but the result does not change. Pls help me...
Electronics Forum | Mon Aug 22 18:25:54 EDT 2016 | cox1
I have a MS level 3 component that has been on the shelf for 7 years. Should it be baked before usage. The HIC card reads ok- and it was stored with desiccant. History of the part is unknown, was purchased from franchised distribution.
Electronics Forum | Fri Sep 02 04:18:48 EDT 2016 | bukas
i have tested voltages on Processor board X12. all voltages are ok and stabil but +VPP (PT8 - TP9), it reads 0 volts
Electronics Forum | Thu Aug 25 17:29:14 EDT 2016 | shawn_halo_1
Right, but these contacts have up to 36V running through it 20 minutes at a time unlike your wedding ring when you are swimming. If you take a look at the picture I posted in the last comment, that is what we are seeing over the course of use.
Electronics Forum | Thu Aug 25 18:14:10 EDT 2016 | davef
Shawn ... I believe you. I believe what you're saying. I don't believe that you received the metals that you ordered. From the way it looks I'd guess that you have no nickel and that you're seeing copper corrosion.
Electronics Forum | Wed Aug 31 18:58:38 EDT 2016 | cpudave
We have an old Quad 100 that we use for small volume small board production. Could use another one, also a parts machine.
Electronics Forum | Mon Sep 05 12:11:38 EDT 2016 | sarason
The next question how do you do repair through conformal coating . Opps! Better off having done all your inspection and testing first! Hopefully your question is for service! regards sarason
Electronics Forum | Fri Sep 09 08:37:38 EDT 2016 | williamaxler
Amistar Dataplace is an inline label printing and placing machine. I have used one in the past will good results. http://www.amistarautomation.com/data_place.htm
Electronics Forum | Fri Sep 16 08:59:38 EDT 2016 | cgreiner
Phil, I had the same problem with my Gridlok blocks. Contact Jean Schroy at Henderson Industries in Bethlehem, PA (610-758-9263). They refurbished the three that I had and they have been working perfectly ever since. Best Regards
