Electronics Forum | Tue Feb 09 17:24:09 EST 2021 | smtusa
I have a DEK Horizon 02i. Is it easy to swap between Squeegee and cartridge system just by installing the Proflow head assembly?
Electronics Forum | Tue Feb 16 16:32:58 EST 2021 | rl
Same as above, probably going to be 100nf 0603 or 0402 Caps, or 0805 if old technology. If you have a decent pick & place you can gang pick these - line up 8 reels in a row of the same value for example & cut pick times, and reel changes
Electronics Forum | Wed Feb 17 14:04:43 EST 2021 | spoiltforchoice
I suppose you could line up one reel per gantry if you have one of those 4 gantry chipshooters that knocks out 200Kcph...
Electronics Forum | Fri Feb 26 17:29:04 EST 2021 | charliedci
We have a Juki 740 that functions but we no longer use. The price is right and ready to move.
Electronics Forum | Tue Feb 23 08:46:11 EST 2021 | dianau
Hello, I have a topic with vias discoloration(that's what supplier said) and I don't know if it's an corrosion problem or something else. I believe that maybe the PCB's are not storage properly. I must mention that aren't any problem at soldering. D
Electronics Forum | Thu Mar 04 15:39:47 EST 2021 | SMTA-64387366
We have used an area with silkscreen on the PCB to make the laser printing more readable. This works very well with a wide range of scanners without any issue.
Electronics Forum | Thu Mar 04 18:39:54 EST 2021 | SMTA-64387124
I have successfully used laser marked bar codes on PCBs. Use an area without any copper so that you are marking on the FR4 only
Electronics Forum | Wed Feb 24 12:41:05 EST 2021 | ilavu
I am looking for a PLC program for JOT213 magazine loader. The PLC unit in the machine is Omron CQM CPU21. If anyone have similar model and can share PLC backup.
Electronics Forum | Mon Mar 08 20:39:03 EST 2021 | tey422
For boards that would need the conformal coating process, you would need to have them as clean as possible; especially the no clean process
Electronics Forum | Sun Mar 07 18:06:27 EST 2021 | dilogic
$4500). If you manage to locate manufacturer, please post info here, so we can all benefit. We have one machine that will need bearing replacement very soon...
