Electronics Forum | Wed Jun 12 14:42:40 EDT 2013 | armandogomez
Hello guys ! I am here again with a problem, right now we have a problem with a new product, the problems are with voids with the PTH we put a receptacle with terminal blades that are 1.3mm width in a pth with a diameter of 1.5mm we use a pallet to
Electronics Forum | Sat Jun 07 13:46:43 EDT 2014 | ipdisplays
Hi All, I know that is thread hasn't seen activity in a year or so... I'm having a similar issue in configuring a line. I see that the IEC addr is called version in the real.ma file. This is not helping me since I apparently have two machines that
Electronics Forum | Thu Aug 08 15:47:07 EDT 2013 | joeherz
Shawn, Wow. This is a tough one. The part is a 1 pc where I'm used to seeing a 2pc. In our case, we have several assemblies using a 2 pc system (see Laird BMI-S-207-C and BMI-S-207-F). The "C" and the "F" stand for Cover and Fence. The Fence is
Electronics Forum | Mon Sep 30 16:36:00 EDT 2013 | richardconnell
I have a Universal Instruments Corporation TAB Bonder. Oldish machine. Initial fault on machine : - "Axis Head 1 Z DAC Limit error during move absolute command" Other fault seen after we reset power, Zeroed axis etc. - Axis Head 1 - Z error not re
Electronics Forum | Mon Oct 14 17:23:36 EDT 2013 | markhoch
Thanks 'hege for the info. Have you seen a reduction in solder defects after switching from Air Reflow to N2 Reflow? I'm curious, because in my experience of over 20 years, working at five different companies, (Jabil being one of them), I've never u
Electronics Forum | Tue Apr 08 08:01:35 EDT 2014 | cyber_wolf
So we had a ringblow pump blow up in our CP642. We replaced it and now we are getting hardware NG errors very intermittently.(2-4 times during and 8 hour shift) I see that the x-motor fan, cam motor fan,and oil cooler are all in this circuit. When i
Electronics Forum | Tue May 27 15:11:13 EDT 2014 | dekhead
1. Rising Table Position error is, most commonly an issue of motor movement or sensor(s); Not receiving an expected input (sensor input / 'DONE' signal) in expected period of time. Try homing table in Diagnostics see if it moves and what movements ar
Electronics Forum | Tue Jul 01 11:00:53 EDT 2014 | vistamach
Thank you for your response! I was actually the guy who emailed you a few days back regarding the blank.jpg error message in PCBsynergy. I would really like to try it, but that error is preventing me. I don't know how to initiate communication. If
Electronics Forum | Mon Sep 08 21:12:29 EDT 2014 | eurekadrytech
Hello, Manufacturing process with high moisture and humidity environments and long term storage will definitely see pop corning effects once high temperature from soldering and/or re-flow process. The moisture that has been adsorbed is likely the ro
Electronics Forum | Thu Oct 23 09:45:05 EDT 2014 | rgduval
Generally, excess solder balls found randomly around the board/parts points to either a dirty stencil during printing, or a stencil/board that is shifting during printing (smearing the paste a little, and causing a dirty stencil. If the apertures ar