Electronics Forum | Thu Jul 24 19:20:28 EDT 2003 | Glenn Hitosis
Does anyone know if there's a forum dedicated to the wave solder process? I would like to share ideas and thoughts about this process.
Electronics Forum | Tue Jul 29 21:15:42 EDT 2003 | Dean
Outstanding idea! Hey SMTnet, what do you think? All this talk about smt this and smt that....what about TH? (kidding) I think this idea has merit.
Electronics Forum | Wed Jul 30 08:54:45 EDT 2003 | Neil
I agree that is a good idea. However, I wonder if there is enough activity to warrant new forums (wave solder and/or through hole)? I did searches for wave solder and through hole over the past 90 days and found 38 and 12 posts respectively out of 9
Electronics Forum | Mon Jul 28 16:32:45 EDT 2003 | itempea
Mant, we are reliably replacing BGAs of all sizes and pitches on ENIG. The black pad is not something created through rework, but a defect that the PCB has from the very beginning. Ioan
Electronics Forum | Mon Jul 28 21:21:46 EDT 2003 | danielchan
hello Ryan, you can post me pictures & details of your 0402 part placement. i will try to help. regards danielchan apexservice@apexsmt.com
Electronics Forum | Tue Jul 29 15:55:34 EDT 2003 | swagner
Does anyone out there have any documentation supporting the storage of 1300 gram tubes on the tip. Thanks in advance!
Electronics Forum | Fri Aug 01 12:35:54 EDT 2003 | blnorman
Kester recommends that we store our 1400 gm tubes on the tip. Our documentation is based on their recommendation. The Alpha past we used was stored horizontally, but that was because the flux readily separated from the metal.
Electronics Forum | Tue Jul 29 17:05:10 EDT 2003 | bradlanger
Has anybody had experience with BTU and Heller Reflow ovens? What are the major differences if any? Which one would you prefer?
Electronics Forum | Tue Jul 29 17:56:45 EDT 2003 | Bill Petlock
Brad, I sell both machines on the used market. If you buy the proper oven for your use you should be very happy with either. Both companies are very reputible and responsive when you have problems.
Electronics Forum | Wed Jul 30 23:16:01 EDT 2003 | praveen
The profile is enclosed.The PBGA is 37x37 mm.I am keeping the gap about 4-5 mm.The profile meets the solder paste spec.Peak temp is 211 deg C,Above melting point 77 sec. rate of heating
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Liwu Industrial Park, Yuanzhou Town, Boluo
Huizhou, China
Phone: +86-138-29839112