Electronics Forum | Tue Dec 13 18:30:46 EST 2011 | IT23
Currently, we are using fixed barcode scanners that connect to Cogiscan PFC box. The scanners are mounted using a flexible arm. The flexible arm is hard to adjust so that the scanner will be on top of the label every time it hits the sensor. I'm look
Electronics Forum | Wed Dec 14 04:34:50 EST 2011 | caerleon
I am installing MSL (Moisture Sensitivity Level) Controls in the company. I have been trying to contact manufacturers to obtain the MSL level (1-6) for each family of part they produce. Well i havent had a great response as they say refer to the dat
Electronics Forum | Tue Dec 20 20:00:01 EST 2011 | rspoerri
We don’t do it often, but on a test failure, when the cost of a BGA relative to our confidence that we might have a questionable joint is high, we will flux it with a low solids no-clean flux and reflow it again. We don’t do it often enough, and d
Electronics Forum | Wed Dec 21 17:11:58 EST 2011 | davef
Kim: We understand what you're saying. For us, fluxing the BGA and activating the flux are the issues. * If you're squirting liquid flux under the BGA with a plastic bottle with a needle tip on it and then reflowing less than the whole board with a
Electronics Forum | Sat Dec 24 19:39:43 EST 2011 | dontfeedphils
I've reflowed many different size BGA's in an effort to better the connection and to help the board pass functional test. Using a middle of the road liquid flux and a convection spot rework machine and almost every time I would reflow a failed board
Electronics Forum | Thu Dec 22 06:46:01 EST 2011 | rameshraja
Dear All, We are doing PCBA's manufacturing,Inprocess we are doing manual soldering, reflow and wave soldering process, As per ISO-7.5.2 Process validation ( Special process ) Soldering process is considered as an special process, hence in order to
Electronics Forum | Thu Dec 29 15:07:11 EST 2011 | cbeneat
My Company has 3 XPM2 Vitronics reflow ovens, one new in 06, one new in 08 and one new in 10. They have all been relatively trouble free over the last 6 years, however recently I'm seeing a white powdery substance on my filters, for the two oldest(s
Electronics Forum | Wed Nov 30 15:04:22 EST 2016 | warwolf
We have two of them set up in our line they where made in 2011. we place Atmel AT91SAM9G45-CU 324-ball BGA no issues and other larger PCB blutooth IC's,QFN,QFP full range of sizes. You can make your own profiles for the parts to be recognised if you
Electronics Forum | Mon Sep 23 07:00:36 EDT 2019 | uzbek
Thank you for the detailed response. This FLX is laser-based alignment but we can buy a camera module (FLX-VIS) from the same distributor. The exact PN of the machine is FLX2011 LC. The complexity of boards is components with cases: QFN, QFP, BGA,
Electronics Forum | Fri Apr 21 07:18:40 EDT 2023 | spoiltforchoice
I had quotes for a MY100 -14 a Juki KE-1080 and an iPulse M6ez back in 2011 and at that point all those machines were about the same price with a light feeder package. The MyData however was the only one configured with smart feeders, a tray feeder a