Electronics Forum | Sat Oct 31 09:45:48 EDT 2009 | meritajs
Hello Jeffrey J I could share our experience in using used P& P machine type Philips (Yamaha) and Juki (Zevatech) We had three machines Philips (Yamaha) vintage about1990g, which work till now. They have same type of feeders, which is simple to find
Electronics Forum | Mon Nov 02 15:29:16 EST 2009 | dilogic
Pneumatic feeders are fixed-pitch, which is quite OK for most 8mm tape parts (except 0402 and smaller). Multipitch feeders are electric and cost a lot more, so you should see what pitches do you need and is it worth buying MP feeder(s). We have 30% i
Electronics Forum | Wed Nov 04 13:00:58 EST 2009 | gregp
The GSM sounds great except for one thing--you won't fit all your feeders on it. That is, assuming your feeder list is what you want to have resident on the machine at all times. I think you could rule out 80% of the machines you are considering b
Electronics Forum | Mon Nov 16 19:23:04 EST 2009 | jeffreyj
Whether the Juki is a great machine or not is irrelevant as we just can't justify the "starting from" price of $87k (€58k). So, thanks for the suggestion, but we're trying to keep this under $20k and given that sort of budget we could either buy a cr
Electronics Forum | Wed Nov 04 10:28:04 EST 2009 | vetteboy86
Its been a while since I've worked with a QSP-2 > but I seem to remember that they should have a > puff off value where the machine will actually > blow the part off of the nozzle. I think it was > adjustable under the component handling but I >
Electronics Forum | Fri Nov 13 08:43:02 EST 2009 | herman
reash, Go directly to APS and get one of the APS GF-12 ovens. I have been using these for 15 years as a low-to-medium volume oven for general purpose reflow of CCAs up to about 12" by 12" with excellent results. I use them for BGA re-balling, underfi
Electronics Forum | Fri Dec 18 05:57:02 EST 2009 | sigmaprint
Hello Andy, When did you receive the reply "that they hadn't had any for years"? I would be interested to hear who sent you this. I'm a founder director of Sigmaprint and previously a employee of both SMTech and Speedline Technologies. I can curre
Electronics Forum | Wed Dec 09 09:47:32 EST 2009 | dyoungquist
I am curious as to why you need to mix.... We use a 500g cartridge with air gun. Our process is remove the cartridge from the fridge, allow it to warm up to room temperature before inserting into air gun, then apply bead of paste to the stencil. N
Electronics Forum | Fri Dec 18 12:43:34 EST 2009 | gazupfer
jamm, As with the other answers you've received, I agree there will be a difference. The question is will the difference between the temperatures of the product profiled at the mesh belt put you out of spec when you run production on the rail? the ke
Electronics Forum | Tue Dec 15 10:28:06 EST 2009 | fönsi
Hello I have a trouble with converting CAD-Data in to Pick and Place Files. I have a export-file from Cades-G and I need a File in the ASCII-Format which includes REF, X, Y and DEG, regardless of order to import in my ESSEMTEC Placer. Some months ag