Electronics Forum | Tue Sep 08 15:11:26 EDT 1998 | Mike Demos
Rich: In my experience, I have seen three cases of SMT Capacitors cracking: 1. Due to thermal shock when entering the wave solder. Note that these were 1210 package sizes on the wave solder side of the boards. We were able to trace this back to th
Electronics Forum | Wed Nov 11 10:08:38 EST 1998 | Magnus
| | Hi, | | We are having problem with yield loss due to electrical fail. Further investigation shows that the failure is due to solder bridging under BGA. Has been there any study or experience on how this could occur and what we can do to prevent
Electronics Forum | Mon Jul 27 23:20:14 EDT 1998 | Vincent Robert
| | I am considering of Philips FCM for the next production. | | But I have heard a rumour saying this machine is not capable for checking the lead polarity due to the laser scan system. | | i.e. SOT might be populated in wrong direction. | | Can som
Electronics Forum | Fri Jun 19 02:02:01 EDT 1998 | Scott McKee
| I am involved in the purchasing decision (Technical side) of which placement machine to buy. One of the criteria we need to specify is how many feeders, and what sizes. I have a provitional parts list of a job that we are most likly going to build.
Electronics Forum | Thu Jun 18 10:57:28 EDT 1998 | Mike Moninger
| We offer an upgrade service for notebooks with 486 SX/DX CPUs up to 586-133 MHz using the AMD 5x86-133 MHz CPU in the PQFP package. We are pretty succesful with this service and until today we did more than 1000 notebook upgrades this way. | Now,
Electronics Forum | Sat May 30 18:09:17 EDT 1998 | Earl Moon
| Got handed an assignment for which I'm not totally qualified. Don't expect this forum to had me all the answers. Some answers are obvious as the device types are fairly self explanatory. | As everyone knows, IBM had problems with their ceramic BGA
Electronics Forum | Mon Jun 01 20:37:54 EDT 1998 | D.Lange
| | Got handed an assignment for which I'm not totally qualified. Don't expect this forum to had me all the answers. Some answers are obvious as the device types are fairly self explanatory. | | As everyone knows, IBM had problems with their ceramic
Electronics Forum | Tue Mar 24 17:08:52 EST 1998 | Steve Gregory
David, There was a thread going on the IPC TechNet about exactly the same thing... The ratio that was posted is: Less than, or equal to 30-grams per square inch Which means if you weighed a part and it is 30-grams, you'll need .033" of surf
Electronics Forum | Wed Nov 07 17:11:14 EST 2001 | davef
1 CAN WAVE SOLDER AFFECT OR DAMAGE BGA? Sure. Since you are vague, assuming: * Partially assembled board was not stored to prevent moisture absorption. * BGA is in a plastic package. * Partially assembled board was stored long enough to exceed th
Electronics Forum | Thu Dec 06 23:34:25 EST 2001 | Beny
Pls. help. I�ve problem with non-wetting defect at capacitor termination. I have faced this problem at the 2 kinds of termination. One is chip capacitor 0603 that its outer termination surface composed with 100 Sn (Lead free) and another one is Sta
.gif)
