Electronics Forum | Mon Aug 31 07:56:39 EDT 2009 | d0min0
Hello, since some days we are facing strange problem with SMT component reflow paste on one side of the component is reflowed correctly while the other side is 10%-70% non-reflowed (same component on 3 positions per module, alwyas the same land pad)
Electronics Forum | Wed Mar 17 22:04:05 EST 1999 | Dave F
| Looking for a company that makes a small batch reflow oven. Not a belt-style convection oven, but a cabinet style that can 125 c to 150 c. | | Thank you | Matt: The batch ovens we looked at were very difficult to program. They seemed to want t
Electronics Forum | Wed Apr 08 11:05:53 EDT 2009 | boardhouse
Hi, Need a little more info, 1) this board is definitely delaminated 2) this board looks like a Std FR4 board with 63/37 Hot air finish with probably 140 tg. material. Was this reflowed under lead free temps? 3) Do you Pre-bake product 4) What
Electronics Forum | Fri Nov 06 02:55:10 EST 2015 | arct1c
Hi, we are looking for 1 or 2 new postreflow AOI machines to replace our old ones and possibly 1 prereflow AOI(we never had pre reflow before). In our company we run low volumes and high volumes. I have been looking at Viscom, Mirtec mostly, Cyberop
Electronics Forum | Tue Nov 10 15:25:37 EST 2015 | 31258
Good morning RedChili, This is Marvin from Saki America. I came across your post and I noticed that you are interested on 3D-AOI and 2D-AOI machines. We can offer pre-reflow and post-reflow full 3D-AOI and 2D-AOI for you needs. IF you have any ques
Electronics Forum | Fri Nov 06 07:46:33 EST 2015 | clampron
Good Morning RedChilli, I have worked with Mirtec for quite a few years. I have looked at some of the other machines mentioned but have no practical experience with them. I started with the Mirtec MV-2 (long ago)due to the success of this platform,
Electronics Forum | Wed Apr 13 08:01:32 EDT 2005 | Bryan
Can you please decrease the ramp rate of your reflow profile?In my opion,if you heat the pin too fast,the solder will drop for the gravity and the cappilary force can't draw it back.On the row with much heatsink,this issue won't happen,that's the rea
Electronics Forum | Mon Jun 13 15:22:36 EDT 2005 | peter ng
The correct Frequency to verify your reflow profile is about one week except when you replaced the part,equipment,the channel setting of the oven or running pilot lots.The period of the Themal board is around 50 times.
Electronics Forum | Sun Jan 17 22:16:04 EST 2016 | cmarasigan
We are using KIC (kicthermal.com) in reflow profiling. It uses thermocouple wires about 0.5 meter only each point. Previously, Winkic the machine built in software which requires about 5 meters wire. No need for the operator to stand there and feed t
Electronics Forum | Tue Mar 16 19:25:32 EST 1999 | Earl Moon
| | Looking for a company that makes a small batch reflow oven. Not a belt-style convection oven, but a cabinet style that can 125 c to 150 c. | | | | Thank you | | | TRY GE I HAVE ONE AT HOME THAT COOKES PRETY DARN GOOD. And it will get hotter if
.gif)
