Electronics Forum | Fri Jan 08 16:31:05 EST 1999 | Jason Tomlinson
Our company is beginning to delve into some 20 mil applications and I'm curious to hear what kind of success others have had placing these components. What kind of fall out rates we might expect or any specific difficulties encountered and what acti
Electronics Forum | Wed Sep 17 05:41:16 EDT 2008 | ralphspm
Can Fuji machines such as IP1 and IP2 utilise 2mm pitch feeders provided by Hover-Davis? Has anyone used them on an IP1 or IP2, and if so were they effecient? Does anyone have 2mm pitch feeders that utilise an Fuji IP1/IP2, for sale? We are currently
Electronics Forum | Tue Mar 06 15:59:33 EST 2007 | pima
hello I would like to ask you for advise. I have problem with one of my SMT line and skewed parts at the end of line after reflow. My line is composed: DEK, 3d visual inspection of paste printing, IP3, 8 zones reflow oven. I m builidng there produc
Electronics Forum | Thu Sep 04 21:50:47 EDT 2003 | davef
We like to use "enameled wire" that can be stripped by hot solder. Formvar [105�C] will not do that. Formvar was designed to with stand the hot oil seen in transformers. So, it requires either chemical or mechanical stripping. Most polyurethanes
Electronics Forum | Thu Sep 10 17:10:00 EDT 1998 | Steve Gregory
Hi Tim, 8-mil huh? Boy, that's getting down there...you know, placing 8-mil is one thing, but printing solder paste on 8-mil pitch is another. Most of the time when I've seen 8-mil pitch on a board it's been attached with hot-bar...but I guess
Electronics Forum | Tue Dec 17 18:16:18 EST 2002 | davef
Square apertures can have a larger area within the same space than a round aperture. You can buy IPC 7525 from IPC. The theory you are missing has to do with: * Aspect ratio * Area ratio Search the fine SMTnet Archives for background on these rati
Electronics Forum | Fri Aug 20 11:19:47 EDT 1999 | John
Does anyone have an older DEK 260? I was wondering if a 1995 model 260 with DeKAlign 2 is capable of printing 12 mil fine pitch reliably. (Assuming that it is in good working order) Thanks for any input!!
Electronics Forum | Tue Feb 22 10:44:12 EST 2005 | Dougs
when you talk about stencil design, what would you recommend for aperture size on fine pitch if the customer insists on hasl finish on fine pitch devices? i usually use a 10% reduction on everything we have been using ( 16mil pitch and upwards and 0
Electronics Forum | Mon Dec 16 13:05:20 EST 2002 | k_h
Are you using "on-contact" printing? (is the stencil touching the PCB during squeegee travel)
Electronics Forum | Mon Dec 16 13:24:25 EST 2002 | Stephen
What paste are you using?