Electronics Forum | Sun Mar 18 23:01:11 EDT 2007 | diesel_1t
Hi there, I want help on the following issue. Where I work, we place a component QFP 256 terminals (20 mil pitch)from hitachi (renesas), we use a MPM UP-3000 screen printer, IP-III placement machine and Vitronics 8 zones reflow Oven. lead plating
Electronics Forum | Wed Apr 04 03:07:16 EDT 2007 | pavel_murtishev
Good morning, Problem definition Poor soldering of thermistors with Ag/Pd termination Background Process: lead free reflow soldering Paste type: Multicore LF300, SAC305 Component type: 0805 chip thermistor, Ag/Pd termination PWB finish: immersion A
Electronics Forum | Wed Apr 04 23:36:09 EDT 2007 | Brandon
Ok so.... I have a boss who thinks there is nothing wrong with stacking completed boards smt&thru in totes and submitting them to QA like this. I mean piled upon one another in a tote. Now... it has fallen on me to try to explain in a convincing mann
Electronics Forum | Sun Apr 15 20:58:17 EDT 2007 | darby
PCB > Origin > O* > Skip = No Data In > PCB > Mount > M* > Skip = No Data In > System > Parameter > Position > Waiting Pnt Check that the waiting point is not set at such a co-ordinate that the PCB sensor is seeing the gantry. The pcb sensor also h
Electronics Forum | Fri Apr 20 07:54:25 EDT 2007 | Bob R.
I'm in the high reliability (exempt) sector and have thermal cycled hundreds of boards in the past few years. As far as which is more reliable, SnPb or SAC305, my data is similar to what the technical literature is saying, "It Depends". In low stra
Electronics Forum | Tue Apr 24 18:21:30 EDT 2007 | flipit
Hi, The verbiage states lead finish on components and not solder used in assembly. I have found nothing that states that Swatch got an exemption. Although the 650 micron pitch spec seems to have come from the data Swatch presented in their execpti
Electronics Forum | Thu May 24 17:37:25 EDT 2007 | jmelson
I did one batch of low-density (0805 and standard SO chips) with excellent results. I then spent some time figuring out how to calibrate the mechanical alignment station (most of the calibration offsets on this machine were either zero or several mm
Electronics Forum | Wed Jul 11 14:18:04 EDT 2007 | fredericksr
1) We have been using the replacement tips regularly. We, also, purchased a precision pin gauge that we are using to clear the C14 nozzle without risk of stripping it out. 2) Right. However I've pinned the 0402 centering level down at -25um.
Electronics Forum | Fri Aug 31 16:30:27 EDT 2007 | gmoritz
> > you may wish to do program off-sets per rotation ... I responded: > > You went over my head with that one. ... Steve Thomas helpfully added: > ... can reach that screen with SH SET command, Since I have not yet located a programming manual
Electronics Forum | Sat Sep 08 08:55:24 EDT 2007 | davef
We expect to see a copper shadow along the edge of pads when soldering boards with organic solderability protection [OSP]. IPC-A-610 has defined this as acceptable for years. During early reflow stages, the flux in paste dissolves the OSP where ther
.gif)