Electronics Forum | Mon Apr 05 09:33:42 EDT 2010 | flanz
Hello. I'm new to the group and would like to ask a question about a YTV-2000 that I have. Question is - Could someone explain why my Yestech 2000 has a hardtime with calibration? What happens is that I run calibration before I start a new board.
Electronics Forum | Sat Nov 09 19:18:08 EST 2019 | kylehunter
Hi, I just set one of these up a month or so > ago, so it's all pretty fresh. The 265s have a > pressure sensor amplifier box that needs > calibration using the OEM calibration jig. OR you > can use a 3 quid digital luggage scale from Ebay. >
Electronics Forum | Sat Nov 09 20:08:34 EST 2019 | kylehunter
> Yeah, sorry, just noticed that bit on the > photo. I'll have to have a look at my machine on > Monday to see if there's anything that might > explain it. The pressure system is pretty much > the same on all the 265 variants so if
Electronics Forum | Mon Apr 19 21:37:17 EDT 2021 | ouaret
dear all, update: we got that the calibration of SIM is the problem, the distance between SIMs need to be calibrated. can someone help us get the manual that describe on how to calibrate the SIMs? we have a problem with our cyberoptics AOI machine
Electronics Forum | Fri Dec 08 19:02:12 EST 2023 | madisreivik
Found the main problem During messing around (hopelessly :) we had found the calibration menu and pressed "check". Machine thought that there was a calibration nozzle (maybe 10x10mm square) but in reality, there was d=1.0mm nozzle. Machine decided
Electronics Forum | Fri Feb 10 15:14:08 EST 2006 | Chunks
Establish a profile board. It should be representative of what you normally run on a daily basis, size and parts wise. Attach dedicated thermalcouples so they are permanent and will not move or come loose. High temp solder is best. Establish a pr
Electronics Forum | Wed Mar 06 11:02:07 EST 2002 | slthomas
I worked for a medical instrument manufacturer a few years ago and we had to calibrate all measurement devices. That included everything from our vapor phase oven's thermocouples to 6 inch steel rulers. I don't see any logical justification if you'
Electronics Forum | Thu Mar 07 19:19:41 EST 2002 | dason_c
Ron, you need to check all the thermal couples are in good shape and clean before ask the outside service to do the calibration. After the machine calibrated and I suggest that you run 2 profiles and all the heating zone set at the same temperture,
Electronics Forum | Thu Aug 22 04:08:17 EDT 2002 | Jason Baldwin
Symptom: Board Stuck on Print Conveyor error messages. Cause: Board not flagging the camera sensor. Remedy: Check the following items: � Check the camera sensor can see the board underneath. � Check the camera sensor calibration (in Tools, Camera Re
Electronics Forum | Tue Mar 04 10:50:25 EST 2003 | ggspook
Hi Mike Interested on your thoughts about (Pam) Placement Accuracy Measurement I am looking into establishing Accurate repeatability of my equipment we check our calibrations Regular and the calibrations are in spec but this does not guarantee
