Electronics Forum | Tue Nov 14 18:55:16 EST 2023 | kghadiya
I relate to your problem. We face this issue sometimes. It's mostly flux from SMT, TH process or rework boards. To avoid foam in our Washer, we soak the boards in hot water for 10-15 min before running it through the washer. Or you can spray the boar
Electronics Forum | Thu Jan 11 19:52:55 EST 2024 | travishemen
Check the top of the placing head. There are 3 screws around a piece that pops up when you push up on the nozzle. I had one once that was vibrating and causing the part to place slightly off angle. It is exposed to the vacuum used to pick the part
Electronics Forum | Fri Jan 26 15:54:04 EST 2024 | travishemen
We use a Brady printer BMP21-Plus and M21-500-595-WT 1/2 inch wide labels on our stencils for stencil name and storage rack location. They have survived hundreds of washes through our ultrasonic stencil wash with chemistry. We have never had one fa
Electronics Forum | Thu Mar 28 15:18:21 EDT 2024 | tey422
From the error message, might have to do with the "Z"-axis. You didn't mention you redo the calibration or not, then you should run that too. My guess would be "Z reading maybe slightly off". BTW, last time I work with those Mydata machine were bac
Electronics Forum | Wed Apr 03 09:12:11 EDT 2024 | hta1979
You have to enter the setup utility.Power off the machine,connect AT keyboard to the rear port, power on,press f1, load the bios setup defaults, enter the hdd parameters,in the first menu (Standard CMOS setup) (Cylinder,Head,Sector,Wprecomp) save the
Electronics Forum | Thu May 09 11:29:06 EDT 2024 | oxygensmd
I have tested extra-eye only but there are many other machines for this task. The question is how you want to solve this problem, inline or off-line? I highly recommend that to you, to check YouTube. There are many training and example videos about
Electronics Forum | Tue Oct 31 03:50:20 EST 2000 | JohnW
Honda, Prnting Glueisn't as difficult as it sounds, as long as you have the right stuff and a good set up. It also depend's on what your going to be placing. If your just doing 0603, 0805 and 1208 than you really only need an 8 thou or 10 thou stenc
Electronics Forum | Fri Aug 04 12:57:34 EDT 2000 | Steve Thomas
James, we used to use 3 clamshell type printers (one of which did have a two camera vision system, and did all our fine pitch), but had limited success with 20 mil pitch. 25 mil pitch was no problem. I suspect that you'll find people that have had
Electronics Forum | Mon Nov 22 11:16:04 EST 1999 | Boca
Chris, Some ramblings- Your choice depends on factors like which defects you're looking for, bugdet, quality inspection philosophy, high or low mix environment, sample sizes or 100%, and so on. Are you going to test 100% of the product coming off t
Electronics Forum | Mon Oct 25 14:48:29 EDT 1999 | William
All, I am having a problem with joints being soft after SMT. Especially 25 mil and smaller parts. It seems as though you can slide the leads right off of the solder. It takes only about 30-40 oz. of compression at 45 deg. to move leads off of join
