Electronics Forum | Tue Jan 25 21:45:27 EST 2005 | pdeuel
I am looking for a camera prizm for the Marlboro pack size camera. I will concider buying the whole camera used, working or not if prizm is ok. I figured some of you tech's would maybe have one laying around somewhare. If not how would on go about lo
Electronics Forum | Wed Jan 26 08:36:06 EST 2005 | jdengler
Sasha, A standard RS-232 cable with the proper connectors would work. If you want you can make it. Normally the PC will have a DB-9 theses days so the wiring would be PC Machine DB-9 DB-25 2------2 3------3 5------7 Good
Electronics Forum | Wed Jan 26 05:24:56 EST 2005 | SLVito
Morning All, I have to choice between two axial through hole machines: Panasert AVK 3 and Universal VCD Sequencer 8. I will insert axial components with 0,45 mm to 0,8 mm component lead diameter and perform jumper wire insertion in the same machine.
Electronics Forum | Wed Jan 26 08:27:12 EST 2005 | pr
I am using the AVK and am VERY pleased with it. One thing to keep in mind is incoming tape and reel has to be pretty exact. The parts are going into a feeder and if the width varies too much you'll have problems. After we got control of Tape and reel
Electronics Forum | Sat Jan 29 04:59:02 EST 2005 | Grant
Hi, MYDATA's are ok for lower volume, and they are very flexible. If you only have 1 or 2 trays of components and are on a tight budget, then you can even place the trays on the Y wagon behind the PCB so you can get away without the tray wagon. Al
Electronics Forum | Fri Jan 28 15:09:56 EST 2005 | cardinal
Hi Glenda, I have 5 wavesoldering machines in stock. Electra, two Vectra's and Ultra Pak and a Sensby. I would be happy to work with you on your lead free application. We offer refurbished machines as well as lead free conversions for used wavesol
Electronics Forum | Mon Jan 31 07:01:56 EST 2005 | pjc
These guys http://www.cetaq-americas.com/index.shtml have the CmController that can do the measurement to back up the p&p vendor's claim. A CpK of 1.33 ain't bad. Would like to see 2.0. The picking is critical too. Ask vendors for pick accuracy and
Electronics Forum | Mon Jan 31 07:01:25 EST 2005 | EHess
Run a water-soluble mask that foams in the wash. Use a de-foamer to contol that. One or the other, or both are causing a greasy build-up that is hard to get off in certain areas. I have a closed loop DI water system. Can I use some sort of deterg
Electronics Forum | Thu Jul 07 17:59:58 EDT 2005 | russ
I have found that if you place it "upside down" with the paper on the bottom they work very well also. The paper has a tendency to warp during heating which causes the no connects. by adding flux to the preform you are essentially sticking the pref
Electronics Forum | Fri Feb 04 09:35:45 EST 2005 | glaucon
The base model UP3000 is really a general designation for the platform. The use of "UP3030" designated the configuration of the machine from the factory. The UP3030 (if memory serves me) came with 2D, a vacuum stencil wiper, and a paste dispenser. I
