Electronics Forum | Wed Sep 02 13:54:47 EDT 2015 | derrikf
I noticed a post from a few years ago with a guy looking for the same part, he was directed to Island SMT. Unfortunately, they do not currently have any in stock at the moment. This QA unit was used on Q-series machines made by Quad/Tyco, it was als
Electronics Forum | Thu Sep 24 11:09:02 EDT 2015 | proceng1
We are looking at buying a used HELLER 1800 reflow oven. It is currently set up for 480v and our facility is 208v. I know we can either get it retrofitted or buy a step up transformer. Is retrofitting the machine simply moving a tap on the inter
Electronics Forum | Tue Sep 29 11:49:02 EDT 2015 | spoiltforchoice
Typically - hand soldering as you are currently doing. Should your volume justify it you can invest in a selective soldering solution, these might take the form of a robotic arm that essentially replicates manual soldering or a solder jet similar to
Electronics Forum | Wed Jan 13 13:00:14 EST 2016 | anvil1021
We are experiencing a few issues every now and then with acceptable reflow results? We have changed solder paste, thus reflow profile types and even reflow ovens but we still seem to get some not so good reflow on certain pcbs. We can even take PCBs
Electronics Forum | Tue Feb 02 17:00:50 EST 2016 | warwolf
Hello, We are currently having a problem with the output of the cameras in our SM421, the fault we are seeing is a flickering across only the 6 flycam cameras (this is causing SM vision to not correctly reference the parts) We have tried: Swapping t
Electronics Forum | Mon Mar 07 15:48:42 EST 2016 | mmjm_1099
I continue to get this error for about a week now and still have not been able to clear it. I can continue running but just need to click to confirm. So I have a feeling it is a simple fix that I am overseeing and need your input on. We have looked
Electronics Forum | Mon Apr 04 13:26:40 EDT 2016 | duoman
Mainly for ERSA machines, but I welcome other machines info also. What are you guys getting in regard to nozzle life? I am running an ERSA 3/45 with 4 solder pots in it. 2 lead solder and 2 leadfree. I'm very pleased with the nozzle life I'm gettin
Electronics Forum | Wed May 18 13:11:08 EDT 2016 | skyler0121
SMT, I currently work with both 2D and 3D AOI machines. 3D does give you the added benefit of Height on components which does help cut down on some of the over rejects. However, it does still have trouble with some of the same things as the 2D system
Electronics Forum | Thu Jul 21 14:54:32 EDT 2016 | ttheis
Acetone is flammable and hazardous to deal with. The fewer fire hazards and nasty fumes the better in my opinion. I would either go with a alcohol based no-clean for economical processesing and boards that can't be washed, or water washable if you ca
Electronics Forum | Tue Oct 04 20:31:16 EDT 2016 | davef
IPC-7721, Section 6.1, Jumper Wires, Jumper Wire Selection #5 states: "Recommended wire is solid, insulated, plated copper wire, 22 to 32 AWG with a heat resistant insulation. Wire with tin-lead plating may be restricted due to environmental laws."