Electronics Forum | Mon Feb 04 11:39:51 EST 2019 | robl
No worries. From memory you could get 2 types of head - 1 where you had grippers and the other where the head held the whole panel. We had interchangeable grippers. Also had some Cencorp 1000 & 1300BRs which were ok, but not sure on Global support
Electronics Forum | Sun Mar 22 19:11:43 EDT 2020 | sarason
THe Ealead software pretty much does everything for $1000US, Its big weakness is its importing, for this you use PCBSynergy. Have you tried the Ealead demo it run's for a month.But it is limited to 10 feeders sarason.
Electronics Forum | Fri Jun 26 09:57:17 EDT 2020 | bobpan
Jeremy, That is a quad 1000. It is a first generation samsung machine with a quad label. I used to train/service them. Contact me if you want some information on it. My contact info is at: www.precision-repairs.com Bob
Electronics Forum | Mon Jan 18 00:52:20 EST 2021 | richard07292
I have the iSpector Box for about 2 years. The question is, when you have 1000 components to check, 150 to 450 failures that are not bad parts. Are there people who have the same problem?
Electronics Forum | Tue Jul 27 11:40:13 EDT 2021 | proceng1
Is this the tray feeder that comes with the SAMSUNG SMT machines? If so, I believe the SUPERVISOR password is 1000
Electronics Forum | Tue Sep 07 15:23:20 EDT 2021 | majdi4
1 ) Component is not Rohs : Material analyzes confirm that they contain lead over than < 1000ppm 2 ) upper piston blocked after reflow 3 ) wetting was unstable and slow due to heat transfer will you produce with ??
Electronics Forum | Fri Oct 15 05:20:21 EDT 2021 | jandon
Does anyone have experience with DAGE Assure, Hawkeye 1000, XRHCount or similar X-ray component counters? I myself have no experience with any X-ray equipment so any kind of feedback is important.
Electronics Forum | Fri Mar 03 14:31:42 EST 2023 | klauss
does anyone have winding machine which can handle all the proses in it? I want to produce at least 1000pcs per a day. any suggestions?
Electronics Forum | Mon Sep 25 20:00:02 EDT 2023 | fuji_user_2014
I need to remove solder mask from a ground plane for rework purposes. What is the best method for doing this in the scale of 1000-1500 units? Recommended tools?
Electronics Forum | Thu Feb 22 20:53:44 EST 2001 | davef
You're not sposed to pull the mask from the BGA when reworking it!!!! ;-) Well, if you insist. You can be as fancy as you want. Basically, all you need to do form a dam to prevent the solder from flowing from the pad to the via and starving the
.gif)
winsouce.jpg)