Electronics Forum | Wed Jan 18 10:35:09 EST 2006 | slthomas
That is pretty much what we did at a previous employer. This was a medical device manufacturer so the validation had to show that the system met the current (circa 1985) standards. 'cept we used a converted fridge.
Electronics Forum | Wed Jan 18 16:50:04 EST 2006 | slthomas
Don't know why it would....the available oxygen shouldn't change any. You could always use nitrogen if you were worried about that. ;)
Electronics Forum | Wed Jan 18 11:09:04 EST 2006 | Sona
I am looking for a schematic on a Heller 1088. If anyone can help me with this much appreciate it.
Electronics Forum | Wed Jan 25 12:22:42 EST 2006 | marcpeo
Please contact Tony Pompei at tpompei@hellerindustries.com. Please include serial number of the oven with your mail. Best Regards, Marc
Electronics Forum | Wed Jan 18 12:21:06 EST 2006 | james
I dont really care about res. and caps. as much as I do ICs. Most of the parts fall out from feeder problems or Vib settings.
Electronics Forum | Thu Jan 19 14:43:08 EST 2006 | jeffharley
So as far as pb free compliance in EU there would be no residuals from pb on the pcb's to speak of. We also have deionization cabinet with chealate filter for heavy metals that recirculates the wash water.
Electronics Forum | Wed Jan 18 17:00:18 EST 2006 | gipos
Can someone help me with Hollis FCR310 reflow owen data. Seems that it is difficult to find anything.After Electrovert purchased Hollis, the support is missing. Where to find user/service manual.....? Any data will be highly appreciated. Thank you
Electronics Forum | Thu Jan 19 07:06:37 EST 2006 | aj
St17 and 19. One thing you could do is to swap heads and see if it is related to a certain head. Also, I have changed faulty amplifiers in the past so make sure you are getting the signal at the end of each fibre optic cable. aj
Electronics Forum | Thu Jan 19 12:05:41 EST 2006 | daxman
We've checked the Amplifiers, and the optics and they seem to be finctioning just fine. The issue doesn't seem to be related to specific heads. The errors show up often, and on random heads. Do you think this could be faulty reverse theta motors?
Electronics Forum | Tue Jan 31 19:43:24 EST 2006 | Miguel Sangabriel
You may also make sure to use the adequate lubricants. _Have you made the 10,000 hours maintenance?
