Electronics Forum | Thu Feb 17 09:35:16 EST 2011 | ravo
Hi everybody, I am here seeking your experience and asking your help, I want to update our SMT production line as I already hace FUJI CP6 and QP242 machines beside GL2 and oven our new product including 60 components 0402 (1mm*0.5mm ) and 2 BGAs w
Electronics Forum | Wed Feb 23 00:45:49 EST 2011 | tsvetan
Does someone with technical knowledge knows what exactly happend with the solder paste after the shelf life pass? What we have seen is sometimes flux separation which disapear after a good mix, and change of viscosity i.e. drying. The tin, silver and
Electronics Forum | Sat Feb 19 11:40:40 EST 2011 | ravo
Hi everybody, I am here seeking your experience and asking your help, I want to update our SMT production line as I already hace FUJI CP6 and QP242 machines beside GL2 and oven our new product including 60 components 0402 (1mm*0.5mm ) and 2 BGAs w
Electronics Forum | Tue Mar 01 12:07:35 EST 2011 | gregcr
Hi All, We are gathering information on the environmental conditions in our facility, including the fresh air exchanges. A driving factor is any point of exhaust that goes to the outside air and the CFM that it pulls from the facility and if there
Electronics Forum | Tue Mar 01 16:39:58 EST 2011 | leppy
I have a VIOS file that we generated from an ftip file using PPS. I load that file into the AMS software to do optimization and feeder distributing. I have a few things that I need to do to every workorder that I create but they are fiddly to do
Electronics Forum | Mon Mar 07 09:15:03 EST 2011 | remullis
Reese, Thanks for the response. I agree with all of your comments, and actually we have SMT capability now. I also worked previously for a company for 20 years where we done primarily SMT and through the years phased out as much TH as possible, espe
Electronics Forum | Tue Mar 08 10:06:43 EST 2011 | kevslatvin
When we were looking for machines we were looking at some of the same brands but ended up going with Assembleon Opal XII. They have since been replaced by another model. We have been happy with them. Have not placed any BGA's but 0402's are not a pro
Electronics Forum | Mon Mar 28 08:56:26 EDT 2011 | cvoyles
Where you inspect depends on what you're looking for. X-Ray is a fairly specialized piece of gear and doesn't lend itself for example to paste registration or thickness measurement. A laser system is better suited. An X-Ray system would allow you to
Electronics Forum | Wed Apr 06 04:18:03 EDT 2011 | emmanueldavid
TK, Hope you got it right only for this round of assemblies. Well, passing through a Reflow belt is not an ultimate process to dry circuit cards & take out moisture from Solder finished layers. First of all, if the packs were not unsealed (even s
Electronics Forum | Fri Apr 08 05:26:56 EDT 2011 | vinitverma
Hello, We offer a product called - PROCAM for this very application. PROCAM uses Gerber (274X) as input and extracts the centroid data for each component automatically. It exports the centroid to standard excel format (including board outline, circu
Buyer, Seller, Broker of Electronic Assembly Equipment
Equipment Dealer / Broker / Auctions
309 West Pickle Alley
Rushford, MN USA
Phone: 507-864-7477