Electronics Forum | Thu Jan 22 11:59:42 EST 2009 | evtimov
Hi, I had a presentation on this system not long ago. That is probably the best you can buy for money. It can really show details for everything. Some issues : - very expensive - too many software options - so it's not that easy to teach it. That'
Electronics Forum | Thu Jan 29 06:29:33 EST 2009 | sachu_70
There are two profiles available for the Pb-free process: (1) RSS and (2) RTS. In your case, you should try a solder paste that supports RTS profiles. A minimum of 7 zone Refow Oven would be fine on the Pb-free process. However, you may still try by
Electronics Forum | Tue Feb 03 03:57:37 EST 2009 | sachu_70
Hi George, I would suggest you to re-look your process parameters, especially for the pre-heat temperatures and the amount of flux deposited. The mask properties and that of your flux also play a role, but you could zero down to the root cause after
Electronics Forum | Mon Feb 16 18:16:44 EST 2009 | essemtec1
TommyG, My name is Steve Pollock and I am the VP of Sales for Essemtec in North America. see link...www.essemtec-usa.com/products.aspx/SMD-Pick+Place-Systems/?n=02.02 for our Expert pick and place system. we have sold over 3,000 world wide and th
Electronics Forum | Mon Feb 16 18:18:54 EST 2009 | essemtec1
I can help franzzled man, My name is Steve Pollock and I am the VP of Sales for Essemtec in North America. see link...www.essemtec-usa.com/products.aspx/SMD-Pick+Place-Systems/?n=02.02 for our Expert pick and place system. we have sold over 3,000 wo
Electronics Forum | Tue Feb 17 09:23:52 EST 2009 | patrickbruneel
We spoke so many times about recycling electronics being the correct way to avoid potential dangerous materials reaching a landfill. Well here it is Best Buy is implementing a recycling program without it being a law and for free. I find this remark
Electronics Forum | Thu Feb 26 03:26:40 EST 2009 | sachu_70
Hey, changing jobs shouldn't be in blind faith. Whether abroad or in your own country, you always need to do your "homework" before taking such important decision. I have lived in China for sometime and was closely associated with the Electronic Manu
Electronics Forum | Wed Mar 04 12:30:52 EST 2009 | exsydeco
Talwadker, thats the thing... this guy didnt guide me in the right way and he ensure there is a special arrangement between Italy and my country that i do not need a permit. And i was too easy to believed him till i found out the truth. but its ok,
Electronics Forum | Wed Mar 11 13:18:32 EDT 2009 | smellew
Even if you disable the MTU(see address 1005 to link out E-stop & address 1219 for the safety fence rear) the servo still needs to be replaced. SA6 is the faulty one, i'm sure there are many dealers who could supply you one. if you need further conf
Electronics Forum | Fri Apr 10 18:51:39 EDT 2009 | boardhouse
Hi Jeff, Your board supplier could be correct in this way. The board could have had just a hair left of copper on the circuit, which would hold up under the electrical test process, but once you powered it up, then there was enough juice to burn th
.gif)
