Technical Library | 2021-07-13 19:59:34.0
We have investigated the processing of lead-zirconate-titanate-based thick films by inkjet printing Pb (Zr0.53Ti0.47)0.98Nb0.02O3 with a 6 mol% excess of PbO nanosized powder dispersed in water. Differentwaveforms were employed to determine the optimum size and shape of the drops. A uniform, defect-free pattern with dimensions of 4 mm × 4 mm can be printed using 20 V and a drop spacing of 20 μm. The inkjet-printed films were heated to 400 °C to remove the organics and subsequently sintered at 750 and 850 °C. The correlations between the density, grain size and electromechanical properties of the thick films and bulk ceramics are qualitatively discussed. A thickness coupling factor of 46% was obtained for a 15-μm-thick film sintered at low temperature of 850 °C, which is comparable to the value of the bulk ceramic with an identical nominal chemical composition. Our results are important for the economic and environmental-benign printing of piezoelectric materials applicable in variety of electronic devices, such as sensors, actuators, transformers, piezoelectric energy harvesters and transducers.
Parts & Supplies | Chipshooters / Chip Mounters
There is stock for sale. If you are interested, please contact us for a quotation by email. Email: info@qosmt.com
Used SMT Equipment | General Purpose Equipment
Camera based beam splitter with adjustable red/green LED's. Pivoting Total area viewing Full size PC with 17" monitor and Windows 2000. Standard board carrier with 7" x 12" High Power Radiant Bottom Heater. Motorized Z axis for Semi-automated operati
Industry Directory | Consultant / Service Provider / Distributor / Manufacturer
We are VONSQUARE the start of a Smart Factory. VONSQUARE provides the standard infrastructure for SMT.
Used SMT Equipment | Pick and Place/Feeders
Placing 9,700 components per hour under optimal conditions, the user friendly Samsung CP20CVTM provides one of the highest Cost/Placement ratios in the SMT assembly equipment market. High speed of 0.37 sec/chip featuring On-the-Fly optical cente
Used SMT Equipment | General Purpose Test & Measurement
Agilent E3633A DC Power Supply, 8/20V-20/10A - See more at: http://www.testequipmentconnection.com/5543/Agilent_E3633A.php#sthash.KLLtsFFU.dpuf
Used SMT Equipment | In-Circuit Testers
Teradyne TSLX/LH ICT System Ultra124L/Ultra128L up to 7680 pionts ICA PIO System Controller 7V/20V/60V Alliance P/S HP DC7600 PC Controller Dignostic Test Fixture
Used SMT Equipment | In-Circuit Testers
Teradyne TSLX/LH ICT System Ultra124L/Ultra128L up to 7680 pionts ICA PIO System Controller 7V/20V/60V Alliance P/S HP DC7600 PC Controller Dignostic Test Fixture
Used SMT Equipment | In-Circuit Testers
Agilent 6284A Power Supply; 20V, 3A, 60W The Agilent-Hp 6284A Power Supply has separate coarse and fine voltage and current controls that allow the voltage and current outputs to be varied from zero to the maximum rated values very easily a
Used SMT Equipment | In-Circuit Testers
Agilent 6284A Power Supply; 20V, 3A, 60W The Agilent-Hp 6284A Power Supply has separate coarse and fine voltage and current controls that allow the voltage and current outputs to be varied from zero to the maximum rated values very easily and a