Electronics Forum | Thu Aug 09 19:13:37 EDT 2007 | htran
DaveF, Our customer requirement is to comply with IPC-STD-001 but the J std doesn't specify the bake out temperature for populated boards and the moisture absortion rate. Right now we are baking the populated PWAs after aqueous wash at 80C at 18-48
Electronics Forum | Mon Sep 28 08:35:15 EDT 1998 | Earl Moon
| I recieved a pack of sensitive IC's that said they needed to be baked befor certain processes. If I need to do rework, do I have to bake prior to single soldering of these IC's. Or can I just place one as needed by hand with out baking? Any info
Electronics Forum | Thu Apr 20 22:14:51 EDT 2006 | raquel
hello! need ur inputs... if the Matte Sn pbfree finish of the component discolors AFTER having been exposed to bake, or, after reflow, will the base leadframe have any potential contribution to it? i know most likely suspects would be the plating pro
Electronics Forum | Fri Nov 05 14:47:35 EST 1999 | Russ Cutler
We recently came to a cross roads... We have historically baked out ALL of our circuit cards, with a 2 fold purpose 1) to dry the part marking ink, and 2) to eliminate any moisture, which could result in measling further in the process of assembly.
Electronics Forum | Sat Oct 16 23:54:43 EDT 1999 | Stu Leech
We have just completed some scientific work on the subject of component bake-out and alternative methods of getting the job done quickly. If you would like a copy, email me at sleech@ix.netcom.com Stu Leech
Electronics Forum | Wed Aug 08 17:26:40 EDT 2007 | htran
Hello All, I have been searching for the board assemblies bake out requirements acceptance criteria but unsuccessful. Does anyone knows if there are general guidelines for the percentage of the moisture absorption in the PWBs and PWAs? Thanks, Tran
Electronics Forum | Mon Feb 22 13:15:43 EST 1999 | Dave F
| Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. | I have come accross dry nitrogen storage cham
Electronics Forum | Mon Feb 22 12:20:51 EST 1999 | Dave F
| Does anybody have any reliable alternatives to device bake out for plastic bodied components. We do not use a whole package at time and therefore have to oven bake the balance before we can use them. | I have come accross dry nitrogen storage cham
Electronics Forum | Fri Aug 10 16:22:35 EDT 2007 | htran
Davef, The J Standard-001-DS(Ref. 4.9.3)does required board assembly bake out and the purpose of the bake out is to demoisturize the PWB and to prevent board delamination during reflow like you have mentioned earlier. Thanks for your inputs. I hav
Electronics Forum | Mon Jul 21 10:33:51 EDT 2008 | maxpower097
Hey guys. I'm a newb and was thrown in to this project. The company I work for opened some spools of chip they have and it says on a sticker, "BAKE if PINK" and it is pink. Is this something we can do onsite? I have researched it and it says bake a
.gif)
