Electronics Forum | Fri May 15 21:39:48 EDT 2015 | jlawson
Reflow.. 1.Rehm (Germany) - Best in Class Best overall process stability heating system ( Alot of makers have started to copy there VX heating arrangement ). COnveyor chains can be a bit more attention in terms of maintenance on rehm , but if foll
Electronics Forum | Tue Jan 17 05:02:33 EST 2006 | grantp
Hi, I was replying to this thread appearing suddenly. However I have run both machines, and I paid for them myself because I run my own company, and so the choices I made, I personally had to pay for. Also, anyone who's been on this forum for a whi
Electronics Forum | Mon May 21 17:32:23 EDT 2001 | davef
I said: "Our electronic circuit board fabricators seal the boards in moisture barrier bags [MBB]. We discontinued the use of desiccant bags in these MBB because of concerns about the desiccant releasing materials that would affect the solderability
Electronics Forum | Fri Jul 23 13:49:29 EDT 1999 | Bob Neverosky
| | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not performin
Electronics Forum | Fri Jul 23 23:47:03 EDT 1999 | Scott McKee
| | | There is a practise within the industry of an Inspector inspecting a board, and that same Inspector performing touch-up. My opinion is that the Inspection and Touch-up operations should be separate functions whereby the Inspector is not perform
Electronics Forum | Tue Aug 11 12:15:34 EDT 1998 | X-man
| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai Stoney, Probably the best rewor
Electronics Forum | Wed Jul 22 12:34:43 EDT 1998 | Frank Silva
| | We need BGA rework station and x-ray inspector recently in urget case, Do you have any information to rework FPGA package and inspect them during processing. | Thx for any information | Best Regards, | Stoney Tsai Stoney, Check out Nicolet Imagi
Electronics Forum | Fri Apr 01 18:32:51 EDT 2011 | frcdave
Dback, Some questions for you: 1. Are you using the red light configuration for better contrast on the 0402 parts? 2. Is your system fitted with both low and High Magnification cameras? Have you spoken with the guys at YESTech? Their phone support i
Electronics Forum | Thu May 28 09:39:19 EDT 2015 | emeto
Good luck Alexandru. I went through this years ago and it is a lot of fun. For the next 5-6 years you will learn a lot about P&P systems, as you will get your feedback from your customers(trust me it is going to be a lot and you will have to modify
Electronics Forum | Wed Feb 13 17:33:07 EST 2002 | Sheri Connor
Hi Dave, I wanted to make sure you have current contact information for us: ScanCAD International, Inc. PO Box 598 19181 Hwy 8 Morrison, CO 80465 Phone: 303.697.8888 Fax: 303.697.8580 Not only do we sell our scanning systems, we also have a Serv
