Electronics Forum | Tue Apr 12 23:44:51 EDT 2016 | cmarasigan
Try to increase or set to 100% the Lead Check Side (%) for every QPF part data.
Electronics Forum | Tue Apr 12 23:10:09 EDT 2016 | dhollland
Carlo - we do use that. I was asking about the lead check option to catch bent leads.
Electronics Forum | Mon Jun 20 11:13:11 EDT 2022 | sachinverma
Dear All, Please help us for the reflow machine my Query is HOW CHECK REFLOW MACHINE CFM( VS, HELLER, JT ETC). YOUR RESPONSE HIGHLY APPRICATTED.
Electronics Forum | Wed Mar 23 09:32:34 EDT 2016 | dhollland
Can someone explain to me how the scan position of the lead check works and it measured? On our machine the scan position was at .2. I changed this to .1 and could not get a QFP to pass lead check. I then placed it at .25 and haven't had any failur
Electronics Forum | Tue Jun 21 20:45:53 EDT 2022 | stephendo
Are you talking about in the machine as in the blowers? Or the exhaust? When CFM is an issue with an oven I think exhaust. With the blowers I check the oven with a profiler. I would think that the geometry of the heaters and oven would affect how m
Electronics Forum | Thu Mar 24 16:46:29 EDT 2016 | tombstonesmt
The recognition system uses a image histogram for the lead tip check. So, perhaps you were scanning the area from the lead edge to .1-.2 towards the body of your QFP and not fulfilling the required pixel count for that area; increasing it allowed yo
Electronics Forum | Tue Apr 12 21:43:50 EDT 2016 | cmarasigan
There is an auto teach of QFP component for CM402 wherein machine can auto recognize number of pins, pin pitch. Just make sure on your part data you have selected the right reference part (Ref: 171)for QFP. For manual component recog; 1. Set Comp si
Electronics Forum | Tue Jun 21 14:21:34 EDT 2022 | capse
First, I'm a Representative for ECD. You may benefit from looking at the OvenRIDER NL 2+. Information is available on the ECD website (ecd dot com) or from your local Rep.
Electronics Forum | Wed Apr 13 03:20:19 EDT 2016 | smtsparescn
Actually SMT mounter's vision system is similar as the AOI machines,it judges the right or wrong based on: 1.the black and white identification 2.it's measurements 3. the comparison between it's measurements and the input data There is a tolerance o
Electronics Forum | Fri Mar 25 22:03:30 EDT 2016 | annabella
YANGLING SMT CO.,LIMITED Since 2005, 11 years experience China SMT pick and place parts supplier Paticipate NEPCON Shenzhen(2009-2015) Lots of CM402 nozzles on sale. Any interested in please follow me: Youtube: https://www.youtube.com/watch?v=5vvi80
