Electronics Forum | Sat Feb 05 09:08:18 EST 2000 | Dave F
Casimir: Let me expand on something that I said in my response to your thread on ionic testing. Generally, no-clean people don�t use ROSE testing as part of their process control, because the ROSE test is essentially washing your board in DI/IPA �
Electronics Forum | Sat Mar 01 08:17:40 EST 2003 | davef
You're correct that the FR4 is probably the best choise. The majority of the problems in developing your reflow recipe is going to come from the CTE mismatches in the CCBGA , CBGA and PBGA that you put on the board. The other side says given the pr
Electronics Forum | Mon Nov 07 16:31:47 EST 2005 | CW
hi Bob, Thanks for the info. I understand your comments, but I am looking for specific guidance, If I am putting chip capacitors on a .063 FR4 board, what size package should we stay away from to avoid cracking? (I realize this is dependent on h
Electronics Forum | Sun Aug 17 19:06:42 EDT 2014 | natashakt
Hi All, I have been looking in to some failures of PCB's in Assembly. After SMT the boards are stored for different periods of time in high humity environment (72% RH and 21.4 degrees Celsius) before being sent to Assembly to be handsoldered/put thr
Electronics Forum | Tue Sep 07 09:11:33 EDT 1999 | Dave F
| We've noticed that there are many different recommendations for pad sizes for various SMT parts. This seems to vary wildly from manufacturer to manufacturer for the same case sizes. Is there any standards that can used used to specify these sizes
Electronics Forum | Tue Apr 24 21:00:58 EDT 2018 | marlonbc
Hi All, Would just like to course through this concern on a product that we are contracted to assemble. It is mainly used for an automatic hand sanitizer dispensing product. By design there is a restrictive value of current that it needs to dissipat
Electronics Forum | Tue Aug 23 03:29:37 EDT 2022 | samhe
I received a buck-boost DCDC board with an optical sensor from NextPCB, so I mounted the components and measured the efficiency. Table of contents Board received from NextPCB Solder paste printing Mounting of parts Reflow operation check Attaching
Electronics Forum | Wed Nov 20 03:52:16 EST 2002 | iman
Hello, need help on intrusive reflow process, thanks in advance to the experts and general info sharing :) need some help to obtain answers, to following questions: 1) PCB is FR4, 1.6mm thick, 4 layers, what stencil thickness (stencil design guide
Electronics Forum | Thu Aug 10 13:12:10 EDT 2000 | Bob Willis
You may care to review the following from my Circuits Assembly page on line. "HOW FLAT IS FLAT AND DO WE NEED FLAT CIRCUIT BOARD, YES WE DO ? As production problems go there is one that keeps reoccurring time and time again. The blame is usually di