Electronics Forum | Thu Apr 20 05:35:25 EDT 2000 | Keith Stone
Hi Pete We have a Black and Decker Power File and have mounted it on a bench in an enclosure to capture the hazardous dust. We used a hopper (usually used for guttering!) with a wire mesh over the top (static reasons) mounted in the bench top inside
Electronics Forum | Wed Aug 15 20:36:52 EDT 2001 | davef
Look here http://www.national.com/pf/LM/LM3886.html Consider using a perf board. A perf board looks like this http://home1.pacific.net.sg/~fung/circuit.html. Here�s how to use perf boards http://www.reprise.com/host/circuits/perfboard.asp. You ca
Electronics Forum | Fri Feb 02 08:36:14 EST 2007 | CK Flip
Wow, I cut first cut my teeth in the Industrial motor control industry. My 1st company made motor control products like variable speed drives, solid state overload relays, soft starts, etc. and in our shop, we used nothing BUT Dow Corning silicone p
Electronics Forum | Thu Aug 25 11:53:12 EDT 2016 | shawn_halo_1
Sorry if I was not clear. We have a Flex Circuit Board that is ENIG Finished. There are two connectors that are SMTd to either side of the Flex to connect to other PCBs within the system. Then, we have conductive rubber contacts that are press fit on
Electronics Forum | Thu May 20 09:20:08 EDT 2004 | jsk
Voltage checks out ok after i unplug the monitor and unplug the dc voltage suppy to the y1 enclosure. I lose the 24v and 5v line completely when i plug these in and voltage drops on the +12v and -12v, which leads me to believe a bad power suppy. What
Electronics Forum | Thu Sep 25 09:56:23 EDT 2008 | mysmt
Hello, we are using DEK265gsx printers, at the minute ARCOM unit is not communicating with motor control cards 0,1,2,3 in Y1 enclosure. Checked CPU & RS232/485 cards from other DEK265, found okay. Any help will be appreciated. Mysmt
Electronics Forum | Fri Sep 26 08:11:15 EDT 2008 | dwelch123
Try swapping cards in Y1 enclosure. You can swap zero and one or two and three but make sure you change the shunt position and the dip switch settings and see if your problem switches cards. The lithium battery likes to fail on those cards. Reload th
Electronics Forum | Wed Jun 24 06:49:59 EDT 2009 | vetteboy86
I'm building a clamshell test fixture. I have all the pins and sockets to make a bed of nails. I purchased an enclosure. Everything else is pretty standard. I do not however have any information on pushpins. These would be inserted into the lid, then
Electronics Forum | Tue Oct 11 09:30:17 EDT 2011 | davef
UL746 Standard for Polymeric Materials is used for testing plastic enclosures used in electronic assemblies. Look here http://www.ul.com/global/eng/pages/corporate/contactus/faq/industries/plastics/ We're unaware of UL involvement in solder. Bare b
Electronics Forum | Wed Aug 24 22:02:44 EDT 2016 | davef
Sorry. I'm not connecting. What are you talking about: * Bare ENIG pads * ENIG pads that have SMT and other components solder connected to the pads So, you've got this ENIG board in an enclosure that takes-on water ... What is getting corroded? Talk
