Electronics Forum | Thu Oct 01 03:03:29 EDT 2009 | cunningham
what we are getting is open circuits not every BGA is failing we use Humiseal 1A33 and currently there is no masking instruction for around the BGA
Electronics Forum | Mon Oct 05 04:55:42 EDT 2009 | pengliang
we suggest as below : the first : check the soldering(solder ball and pad) by X-ray ; second: to do dye analyse (note:pls confrm is there have crack )
Electronics Forum | Tue Sep 10 08:46:10 EDT 2013 | rway
You're in the wrong forum. I doubt anyone here will have any experience with your type of issue (without researching it). Have you tried the dealer or a dealer related forum?
Electronics Forum | Mon Sep 16 13:57:31 EDT 2013 | emeto
By tape manufacturer you can have up to two empty slots in the tape. That means you should have two retries after the first pick up.
Electronics Forum | Tue Sep 17 17:55:36 EDT 2013 | dilogic
Yes, I know all that, but I am interested in some real figures from the field. That is, what percentage of mispicks do you experience on average (for large runs, of course)?
Electronics Forum | Tue Aug 23 13:25:10 EDT 2005 | MMurison
MUAnalysis is an independent lab for Component Failure Analysis and Reliability Testing in Ottawa, Ontario Canada. We also would be pleased to discuss your analysis needs. We also perform all non-destructive testing, e.g. visual, x-ray, C-SAM, el
Electronics Forum | Thu Oct 01 07:03:55 EDT 2009 | davef
We doubt that Humiseal 1A33 is causing opens in your assemblies. We'd guess the opens occur earlier in the process, but are not hard failures. So, you pass your tests. When applied, the conformal coat flows into the gap in the ball crack and insulate
Electronics Forum | Wed Apr 16 08:43:00 EDT 2003 | davef
Given that the LED work properly after being touched-up and that you don't have problems with other components, you may not be wetting the LED termination solderability protection during your normal reflow. Use a profiler to check the temperature on
Electronics Forum | Tue May 06 14:52:37 EDT 2003 | bremerg
Pictures are now located at http://www.stevezeva.homestead.com/ These components are 2W resistors that only see 1/2W at max. during normal use. I have contacted IRC still wqaiting for a response. The resistors were tested as good. But the circuit
Electronics Forum | Tue Jan 16 10:45:36 EST 2007 | PaulD
Im looking for some help I have a tp18 that will not initiate the error is f-mot1-38-245:msetdynx I tried several things. I've swapped mot cards to not avail, checked the long ribbon cable and so forth if anyone knows what this code means it would be