Electronics Forum | Mon Feb 21 00:35:42 EST 2011 | dman97
The Fuji CP6 and QP242 should be more than capable of placing 0402(cp6) and bga components (QP242). You must be having some programming difficulties.
Electronics Forum | Thu Mar 22 19:47:43 EDT 2012 | skatemo
Hello, someone knows like to alter the time of wait of the stoper of the conveyor in a Qp242 with fuji flexa. What I want is to give a delay to the stoper after it stops registering the pcb Thanks.
Electronics Forum | Thu Nov 11 11:33:30 EST 1999 | Brian E. Steelglove
Charley, I dont know what you define as durable but the one thing that I know about the QP 242 made by Fuji is that its slow and a very clumsy machine. The QP 242 is what Fuji calls there modular concept machine. I dont know about you but when I hea
Electronics Forum | Tue May 22 09:11:35 EDT 2007 | jola
Hi. We have changed our produktion from high volume to medium/low and have to start hunting change-over time. We have a lot of products with two sides and the settings of pins in the DEK 265 and Fuji QP242 machines when running b-side takes to long t
Electronics Forum | Wed Apr 28 22:16:51 EDT 1999 | Steve Gregory
| Hi everyone, | We started our first machine placed shield test today.We will be machine placing shields with in the next two months. I used a Fuji Qp242 today. There were no problems with pickup etc,. just vision errors. I'm sure we will work the
Electronics Forum | Tue Jul 25 20:36:08 EDT 2000 | Jason
What type of machine are you placing the PLCC68 with? We place PLCC84 on a Fuji QP242 and we use Hover-Davis electronic feeders. They are expensive but worth the money as you can change the pitch to many setting as long as the width remains the sam
Electronics Forum | Wed Apr 28 21:59:29 EDT 1999 | KEVIN SIMPSON
Hi everyone, We started our first machine placed shield test today.We will be machine placing shields with in the next two months. I used a Fuji Qp242 today. There were no problems with pickup etc,. just vision errors. I'm sure we will work them ou
Electronics Forum | Fri Mar 18 19:36:14 EST 2005 | Andrey
We have two proposals for purchase about multifunction machine. First � MPAV2B Panasert with full parts - vintage 2000 Second � QP-242E Fuji (4 Units) with Index BI-607x3 and single BS-607x1 modules � Vintage 1999. Please tell anyone if possible. Wh
Electronics Forum | Thu Apr 29 00:00:50 EDT 1999 | FAC
| | Hi everyone, | | We started our first machine placed shield test today.We will be machine placing shields with in the next two months. I used a Fuji Qp242 today. There were no problems with pickup etc,. just vision errors. I'm sure we will work
Electronics Forum | Sun Apr 09 14:20:17 EDT 2006 | greatexpectations
Hi, This setup was recommended. Target is 20,000 board output per day FUJI GL-541 Glue Dispenser (USED) 32K FUJI GL 641 SCREEN PRINTER (USED) 57K CP-643E CHIP SHOOTER 255K (150 FEEDERS) FUJI QP-242E IP3 110K REFLOW 8 ZONE (IS THIS ANY GOOD) 4