Electronics Forum | Fri Mar 13 15:09:20 EDT 2015 | marcelorotofrance
Hello everybody Lately our machine has been working pretty well, but it can’t last too long. Now, during this week’s production cycle, it began to increase the component’s reject rate to alarming levels (obviously the operators reported me when the m
Electronics Forum | Mon Mar 10 20:14:20 EDT 2008 | davef
We'd be unhappy with features that are not in copper that is at the same level as the component pads, because of difficulties the fabricator would have in maintaining registration between the copper pads and the ink used for the features not in coppe
Electronics Forum | Tue Nov 28 15:10:50 EST 2006 | M. Sanders
Unfortunately, I don't have a copy of IPC-A-610 D on hand, however, I believe in IPC-610, this �floating height� between lead and pad has no maximum specification restriction. As long as there is no voiding, it is still acceptable for all 3 classes.
Electronics Forum | Fri Feb 02 13:04:34 EST 2007 | daxman
Hey, thanks for the reply. I decided to check the tops of the clutches at station 8, and there is .16mm of variation between the highest and lowest clutch. It's weird because they are all new. If the tops of the clutches have variation, I'm sure to
Electronics Forum | Mon Nov 26 14:49:20 EST 2001 | mparker
1. The formula for cubic area (LxWxH) applies to get the expected volume target value. Caution- do not assume the pad surface square are is correct for the part. Do consider the footprint of the device beign placed and its solder requirements to cre
Electronics Forum | Mon Feb 05 12:57:35 EST 2007 | cyber_wolf
Take the nozzles out and let the indicator tip touch the metal face the nozzle pushes up into. This will tell you whether the variation is in the shaft or the nozzles. Also while your indicator is touching the holder, manually grab the shaft assy a
Electronics Forum | Fri Sep 10 14:32:49 EDT 1999 | John Thorup
| We have a product, with various PWBs, with over 600 parts each one (We are a low Volume/high mix company with an average component placement per PCB between 250 to 300 parts). This PWBs have 7 to 10, 20 mils pitch parts. We are having problems with
Electronics Forum | Tue Jun 01 07:26:55 EDT 2004 | johnwnz
Alistair, your paste deposit is controlled by a few things: Stencil thickness Squeegee pressure Squeegee speed Print gap in 99 out of 100 applications for paste printing you would have a print gap of 0 i.e. on contact printing where the PCB is in fu
Electronics Forum | Fri Feb 02 10:24:50 EST 2007 | FredC
Daxman, Have you eliminated nozzle variation? The difference between a new and used CP6 nozzle can be .15mm. On a CP4 I would think it could be more. On new Cp4 nozzles the difference in effective nozzle length should not be more than .04mm. You can
Electronics Forum | Tue Sep 24 22:29:04 EDT 2002 | davef
First, I don't have a clear fix on the problem. Please drill-down to more detail. We appreciate that you probably don't know the parlance. Just describe what you have and then what you'd like to have. Second, most 0402 LED are fabricated just lik
