Electronics Forum | Fri May 15 14:50:40 EDT 2015 | emeto
My top 3 printers: 1.DEK 2.MPM 3.EKRA Top 3 ovens: 1. BTU 2. Vitronics 3. Heller or Electrovert
Electronics Forum | Tue Sep 13 10:00:27 EDT 2016 | awhite
Switched out the mech. relay on the board loader, no change. Same behavior. Could not find a mech. relay on the printer... SMEMA wiring appears go directly to a PCB. And it is at that point that I run out of talent. If the machine weren't dedicate
Electronics Forum | Tue Sep 13 07:00:28 EDT 2016 | awhite
Thanks for the reply. When you hit start on the printer, you can see it send the "start cycle (SMEMA)" signal, and it immediately goes to "awaiting board from upstream." This tells me that the printer knows a signal has definitely been sent and rece
Electronics Forum | Wed Sep 14 02:41:49 EDT 2016 | bukas
here is well explained SMEMA interface http://www.daghee.com/?p=326 so, disconnect printer from upline modules and check are any 2 of 4 pins shortened(should be pins No 1 & 2) while machine is ready state. when machine is in busy state the same pin
Electronics Forum | Tue Sep 20 15:00:26 EDT 2016 | awhite
Got it!!!!! On the main Operator Screen for the MPM UP2000, and under configuration (when logged-in under maintenance), it gives you ONLY the settings that the machine is set to....there are no drop-downs or options available to choose from. Very fr
Electronics Forum | Fri May 15 10:12:21 EDT 2015 | capse
I'm the Rep for Vitronics Soltec and ASYS EKRA in the southeastern US. I suggest you take a look at Vitronics ovens. The AutoSet feature makes new profile development as easy as possible without buying a third party accessory, The new EKRA user inter
Electronics Forum | Thu Oct 05 12:51:27 EDT 2006 | john_smith
cn, Currently we have a DEK265GSX a DEK Infinity and a MPM UP3000 printers and previously had MPM Accuflex,MPM UP1500 and MPM AP24s. No advice for the UP3030. We always had to work on all of the MPM printers for one thing or another and every time we
Electronics Forum | Sat Dec 18 01:42:57 EST 1999 | sin
Do you have strong technical support team that have related experience SMT EQUIPMENT in your company? If you do, use machine would be alright. If you don't, you need to hire afew because even with brand new machine, you still have a problem either
Electronics Forum | Wed May 13 15:26:45 EDT 2015 | cyber_wolf
We are high mix - high changeover aerospace manufacturer. We have 3 1809 MK3 air ovens. There has been absolutely no issues with them. We have 4 MPM Momentums. I looked at DEK but felt the MPM's were put together better. They are very easy to use
Electronics Forum | Mon Oct 26 01:37:43 EST 1998 | Samson
I'm very new to the SMT process but I'm tasked to qualify a MPM Printer and a Panasert PnP m/c. The product consists of 6-10 different parts of a total of around 70. Please advice on the parameters for each m/c which I should focus on for optmization
.png)
.gif)
winsouce.jpg)